Usb Connection Setup - Epson EMP-7950 User Manual

List of ESC/VP21 Commands

USB Connection Setup

In order to control the projector using ESC/VP21 commands via a USB
connection, the following preparations must be carried out.
PROCEDURE
Download the USB driver (USB-COM Driver) from the
1
EPSON website to your computer.
The URL is as follows.
http://www.epson.co.uk/support/download/index.htm
Install the downloaded USB driver on your computer.
2
Read the instructions displayed on the download screen.
Change the "COM Port" setting in the "Advanced2"
3
menu to "USB".
Turn the projector off.
4
After the cool-downg
5
projector's power back on.
Once the projector's power has turned back on, communication
via a USB connection will then be possible.
period has finished, turn the
CAUTION
If the power cable is disconnected before cool-down has finished, the
communication port will not be changed.
User's Guide
158