Problem Reporting Using The Mail Notification Function; Mail Notification Settings - Epson EMP-7950 User Manual

Epson projection television user manual
Hide thumbs Also See for EMP-7950:
Table of Contents

Advertisement

Monitoring and Controlling Projectors via a Network (for the EMP-7900)
Problem Reporting Using the Mail Notification
Function
If EMP NetworkManager has been used to make the settings for the mail
notification function, notification messages can be sent to a computer with
a preset e-mail address when a problem or warning occurs with a projector
connected to the network. This will notify the e-mail recipient that there is
a problem with the projector.
TIP
• Up to a maximum of three notification destinations (addresses) can
be recorded, and notification messages can be sent to all three
destinations at once.
• If a critical problem develops with a projector which causes it to
suddenly stop working, it may not be possible for the projector to
send a message notifying an operator of the problem.
• If "Standby Mode" in the projector's "Advanced1" menu is set to
"Network ON", monitoring can be carried out even when the
projector is in standby mode (when the power is off).
Check the following points before starting up EMP NetworkManager.
• EMP NetworkManager must be installed in the computer to be used for
monitoring and control.
• The computer and the projector must be connected to the network.
p.101
p.91
p.99

Mail Notification Settings

PROCEDURE
With Windows running, click [Start], point to
1
[Programs] (or [All Programs]), point to [EPSON
Projector] and then click [EMP NetworkManager].
EMP NetworkManager will start up.
Double-click the icon for the projector to set mail
2
notification for.
If the name for the required projector is not displayed, refer to
"Connecting Manually".
Projector
EMP482800...
PROJECTOR01
PROJECTOR02
PROJECTOR03
address...
192.168.0.8
169.254.10.176
169.254.10.177
169.254.10.178
Room202
Room301
Room302
Room303
Room401
169.254.207.65
169.254.207.66
169.254.207.67
169.254.207.68
169.254.207.69
If a password has been set, the password entry dialog box will
be displayed.
User's Guide
p.106
Room201
169.254.207.64
103

Advertisement

Table of Contents
loading

This manual is also suitable for:

Emp-7900Emp-7950nl

Table of Contents