Interface Map; Reboot; Reset - Efficient Networks SpeedStream 5100 Series User Manual

above, if no change in status occurs after running the diagnostics a second time, contact your Service
Provider for further assistance.

Interface Map

This option may not be available on your router configuration.
Note
The Interface Map window provides a graphical representation of the current LAN and WAN
configurations of your SpeedStream router. It is particularly useful for Technical Support in verifying that
correct protocol encapsulations are assigned and Virtual Circuits (VCs) are mapped to the correct network
interfaces.
To display the Interface Map:
•
On the main menu, click Tools,
and then click
Interface Map.
The Interface Map window
displays.

Reboot

You can shut down and then restart router without losing your current configuration settings.
1. From the main menu, click Reboot.
The System Reboot window displays.
2. Click Reboot.
The System Reboot window displays a countdown while processing. When the router has finished
rebooting, the System Summary window displays.
You can also reboot the router by pressing and quickly releasing the Reset button located on the bottom
of the modem. The pwr LED will blink once.

Reset

This option may not be available on your router configuration.
Note
If rebooting the router does not resolve the problem, you can reset it to the factory default settings or to
the last firmware update.
Important!
• When you reset the router, you will lose any settings you have entered manually.
•
Do not disconnect any cables or the power cord while the router is resetting.
SpeedStream Router User Guide
87