Finish; Configure Rfc-2684 Bridged/Ip Protocol; Enter Ip Information; Use Pppoe - Efficient Networks SpeedStream 5100 Series User Manual

Efficient router user guide
Hide thumbs Also See for SpeedStream 5100 Series:
Table of Contents

Advertisement

Finish

On the VC Wizard window, click Finish.
The Current Configuration window
displays the new connection information.
Configure RFC-2684
Bridged/IP Protocol
RFC-2684 Bridged/IP is a bridged connection wherein the router accepts RFC-2684 encapsulated traffic
from the WAN. Unlike RFC-2684 Bridged protocol, however, the WAN interface has an IP address and
handles the traffic, routing only relevant data
on to the appropriate LAN interface(s). The IP
address used for this protocol can be manually
entered or, if the ISP provides a DHCP server,
can be obtained using DHCP.
From the Protocol Selection window,
click RFC-2684 Bridged; then click
Next.
The 2684 Bridged window displays.

Enter IP Information

1. On the 2684 Bridged window, select to
use DHCP or specify the IP information:
Use DHCP:
If your service provider offers DHCP
server, automatically obtains the IP
address.
Specify IP Information:
Enter IP address, subnet mask, default
gateway (optional) and DNS server
(optional).
2. To continue to the 2684 PPPoE window,
click Next.

Use PPPoE

1. On the 2684 PPPoE window, indicate
whether the connection will also use
PPPoE.
2. To continue to the Interface Options
window, click Next.
SpeedStream Router User Guide
34

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents