3: Configuring Computer Network Settings
To access the Internet through the SpeedStream router, the TCP/IP protocol must be installed on your
computer. If TCP/IP is not already installed on your computer, refer to your system documentation or
online help for instructions.
The default network settings for the SpeedStream router are:
IP Address:
Subnet Mask:
These settings may vary depending on your service provider.
Note
Windows 95 / 98 / ME
1. On the Windows taskbar, click Start,
point to Settings, and then click Control
Panel.
The Windows Control Panel displays.
2. In Control Panel, double-click Networ
The Networ
k dialog box displays.
3. On the Configuration tab of the Network
dialog box, select the TCP/IP entr
your Ethernet adapter; then click
Properties.
The TCP/IP P
roperties dialog box
displays.
The components list for your
Note
computer may differ from this screen
192.168.254.254
255.255.255.0
k.
y for
shot.
SpeedStream Router User Guide
9