Select Pppoe Session Count; Enter User Information; Select Ppp Options - Efficient Networks SpeedStream 5100 Series User Manual

2. To continue to the PPPoE Session Count window, click Next.
The VC Wizard window displays.

Select PPPoE Session Count

•
On the PPPoE Session Count window,
select from 1 to 4 connections; then click
Next.
The User Information window displays.
The process will repeat for each
Note
session you need to configure. After you
have completed the settings for the last
session, the VC Wizard window displays.

Enter User Information

1. On the User Information window, you
can enter a new login username and
password (not required).
2. To continue to the PPP Options window,
click Next.

Select PPP Options

1. On the PPP Options window, select one
or multiple setting(s):
•
Dial-up Only:
Only active when you manually
connect.
•
Autoconnect on Disconnect:
If the connection gets dropped (line
error, router reboot, DSL line drop,
etc.), the PPP client automatically
attempts to reconnect as soon as the
error is resolved. This is like an
"always on" WAN connection.
•
Use Idle Timeout:
If the connection sits without
transmitting for the specified time, the
router will log out the PPP connection. This helps relieve Internet congestion at the ISP level. The
SpeedStream router also provides a Connect on Demand feature wherein the router automatically
reconnects when you attempt to use the WAN connection. Idle Timeout cannot be used with
Autoconnect on Disconnect.
2. To continue to the PPP Static IP window, click Next.
SpeedStream Router User Guide
50