Advertisement
Quick Links
Please study these instructions carefully before installing your new Tubular Exhaust System (TES). If you have any
questions, please contact our Technical Hotline at : 1-800-416-8628 from 7 am - 5pm, Monday-Friday, Pacific
Standard Time or e-mail us at Edelbrock@Edelbrock.com.
TUBULAR EXHAUST SYSTEM: These components are designed as a system to improve the exhaust efficiency of the
Dodge 5.7L Hemi V8 engine. They are constructed of 409 HP stainless steel to better withstand the high heat present with
the fuel-injected engine, especially when used for towing or other heavy duty applications. The stainless steel used for
these systems is much more durable than mild steel, although it does not appear different in appearance. These systems
can be identified by the part numbers on each of the major components. Note that a magnet will stick to this type of
stainless steel; magnetic attraction is not a valid test for these systems. A performance gain can be expected by the
installation of the system. This system does require welding for installation (see note below) and retains all O.E.M.
emissions equipment. Not designed for vehicles with solid front axle.
Proper installation is the responsibility of the installer. Improper installation will void warranty and may
Suggested Tools Needed for Installation: This vehicle has some metric fasteners.
❑ Mig welder (recommended) or gas welder - Professional welding is highly recommended.
❑ 3/8" rachet, sockets, standard and deep SAE and metric & 13mm stubby combo wrench with extensions and
universal 13mm and 15mm swivel sockets
❑ Combination set of open-end wrenches
❑ Hacksaw or Sawzall
❑ Jackstands, screwdrivers, pliers, crescent wrench, etc.
❑ Liquid penetrant, (GM #1052627) and anti-seize compound (GM #5613695)
SPECIAL NOTICE: This Edelbrock Tubular Exhaust System has received an Executive Order number (E.O.#) from the
California Air Resources Board (C.A.R.B.) making it legal for street use in all 50 states. To assist you with emission
equipment certification, we have included a silver fan shroud decal to help testing personnel verify that this part is a legal
replacement on the vehicle for which it is cataloged. The adhesive-backed decal should be affixed next to the existing
emission and engine specifications decal. Do not cover any part of your original emission decal.
WARNING: The use of "Thermal Wrap" or any aftermarket coating process will void the warranty on your Edelbrock
Tubular Exhaust Systems. Those products can cause excessive heat and moisture buildup resulting in corrosion and
failure of the system.
IMPORTANT NOTE:
When cleaning any ceramic-coated Edelbrock T.E.S., use only soap and warm water. The use of caustic solvents (i.e.
gunks, etc.) will mar or damage the ceramic-coating.
Catalog #66792 & 66793
©2007 Edelbrock Corporation
IMPORTANT NOTE:
result in poor performance and engine or vehicle damage.
For 2004-2005 Dodge Ram Pick-Up, 1500 Series,
2WD/IFS, 4WD 5.7L Hemi V8, Automatic Transmission
Page 1 of 3
TUBULAR EXHAUST SYSTEM
Catalog #66792 & 66793
INSTALLATION INSTRUCTION
Brochure #63-66792
Rev. 1/07 - DA/mc
Advertisement
Related Manuals for Edelbrock 66792
Summary of Contents for Edelbrock 66792
- Page 1 Do not cover any part of your original emission decal. WARNING: The use of "Thermal Wrap" or any aftermarket coating process will void the warranty on your Edelbrock Tubular Exhaust Systems. Those products can cause excessive heat and moisture buildup resulting in corrosion and failure of the system.
- Page 2 Cut O.E.M. pipe at the weld in front of catalytic converter Figure 1 Catalytic Converter Catalog #66792 & 66793 ©2007 Edelbrock Corporation INSTALLATION INSTRUCTIONS NOTE: Make sure to have the correct pipe on each side of the catalytic assembly or it will not set right.
- Page 3 ❑ 17 Black hardened washer; 5/16” ❑ 17 Lock washers; 5/16” ❑ 4 Lock washers; 3/8” ❑ 17 Lock washers; 5/16” Catalog #66792 & 66793 ©2007 Edelbrock Corporation Qty. ❑ 1 ❑ 1 ❑ 1 ❑ 1 ❑ 17 ❑ 2 ❑...