HOW TO USE THE TABLE STAND GETTING STARTED LOST COMMUNICATION Honeywell TRANSMISSION COLLISION CALENDAR AND CLOCK DISPLAY MODES Wireless Rain Gauge with Indoor INDOOR TEMPERATURE MANUAL SETTINGS Temperature PRECAUTIONS SPECIFICATIONS FCC STATEMENT DECLARATION OF CONFORMITY STANDARD WARRANTY INFORMATION (TC152) USER MANUAL...
INTRODUCTION PRODUCT OVERVIEW Thank you for selecting the Honeywell Wireless Rain Gauge with Indoor MAIN UNIT Temperature. This device monitors and displays rainfall data along with FEATURES • Wireless transmission of the rainfall data from the remote rain the indoor temperature.
Page 3
• Toggles between the rainfall modes – for the past hour, 24 hours, FRONT VIEW A. WEATHER AND TIME INFORMATION IN A TWO - LINE LCD and for the past 7 days • Increases parameters in the rain mode DISPLAY •...
REMOTE RAIN GAUGE REMOTE RAIN GAUGE FEATURES • Precipitation measurement • Remote rainfall data transmission to the main unit via 433 MHz signal • 100 feet (30 meters) transmission range without interference • Built-in installation level • Mounting hardware • Non-corrosive protective screen D.
Collects the rainfall in one of its containers and self-empties once full rainfall is displayed. I. Protective screen 2. The effective operating range may be influenced by the surrounding Protects the rain gauge funnel from debris building materials and how the receiver (main unit) and transmitter (remote rain gauge) are positioned.
• Place the protective screen over the top to protect the rain gauge rainfall reading (0.00) will appear on the top line of the main unit’s display. from the debris The main unit will automatically update readings at 45-second intervals. •...
DOWN buttons. The display sequence is: LAST HOUR, LAST 24 INDOOR TEMPERATURE HOURS, and LAST 7 DAYS. The indoor temperature is locating above the day of the week LOST COMMUNICATION abbreviation/seconds and can be viewed either in Celsius or Fahrenheit. If the main unit display line for the remote rain gauge reading goes blank, NOTE: If the indoor temperature goes above or below operating press and hold the ▼...
intervals contain no user-serviceable parts. • Press UP button selecting a desired time interval and press SET • Use only fresh batteries. Do not mix new and old batteries. • Read the user's manual thoroughly before operating the units. confirming the setting HIGH RAIN ALARM The high rain alarm for the past 24 hours can be set and displayed at any time by pressing ALARM button on the front panel.
SPECIFICATIONS FCC STATEMENT Main Unit This device complies with Part 15 of the FCC Rules. Operation is subject TIME to the following two conditions: (1) This device may not cause harmful 12/24 hour display in hh: mm format Date format: month-day or day-month format interference, and (2) This device must accept any interference received, Day of the week is selectable in five languages (English, Spanish, including interference that may cause undesired operation.
Copyright (2007) Hideki Electronics Inc. All Rights Reserved. The The information above is not to be used as a contact for support or Honeywell Trademark is used under license from Honeywell Intellectual sales. Please call our customer service hotline (refer to the Standard Properties Inc.