Advertisement
Quick Links
PostScript Picture
(ShockLogo.eps)
Please study these instructions carefully before installing your new Heavy-Duty Tie Rod Sleeves.
If you have any questions or problems, contact out Technical Hotline at:
7:00 am to 5:00 pm, Monday through Friday, Pacific Standard Time or e-mail us at
edelbrock@edelbrock.com.
These are heavy-duty replacement parts for original tie rod sleeves and install basically in the same
manner as the original stock parts. See our catalog for complete application listing. To order a
catalog, please call (800) FUN-TEAM.
1.
Installation of these parts requires precision front-end alignment equipment.
2.
Installation should only be done by a qualified professional.
3.
Following installation, drive vehicle about 10 miles and re-check all nuts for tightness.
Note: It is a good idea to periodically check suspension components for tightness and
potential problems.
©
2001 Edelbrock Corporation
EDELBROCK HEAVY-DUTY TIE ROD SLEEVES
Edelbrock Corporation
2700 California St.
Torrance, CA 90503
Technical Hotline: 800-416-8628
Office: (310) 781-2222
Catalog #5250, 5251, 5252
INSTALLATION INSTRUCTIONS
1-800-416-8628,
Rev. 11/01
Advertisement
