Aiphone TB-nM/D Supplementary Manual

TB-10M/D 10-Call Master
The TB-M/D Intercom and Selective Door Control System is designed for communication between a central master
station and remote door stations. The TB-M/D adds door release to the standard TB-M system. All information
regarding installation other than the external control functions is included in the TB-M instructions. In addition to
communication to remote locations, the Master Station can selectively release the corresponding door strike or
maglock.

WIRING DIAGRAM:

TB-10M/D
1
2
3
~
9
10
E
T
R
12+
12-
M
C
PS-18YC/A
+
AC/
1 ~
DC
-
Input
9
10
To activate door
release, press
button located by
Terminal Block
TRANSFER button.
Individual Components for System:
TB-nM/D Master station with selective contact output capability (10, 20)
RY-PA Relay for selective output (1 per station requiring external contact)
PS-18YC/A 18V DC, 1.2A Power Supply (For Audio Systems)
PS-18C 18V DC, 2A Power Supply (For Audio/Video Systems)
TB-AD1 1 Audio Door Adaptor
TB-AD10 10 Audio Door Adaptor
TB-ADM10 10 Video Door Adaptor
IMPORTANT:
1. RY-PA must be used for each selective contact to
isolate AC voltage from the intercom circuit.
2. Extra contact connections and L are on the
external terminal block.
TB-nM/D
Master Station with Selective Door Release
- SUPPLEMENT TO TB-M INSTRUCTIONS -
SYSTEM USED FOR SELECTIVE DOOR RELEASE
TB-AD1
For Door #10
1
2
N
T
R
+
-
RY-PA
BLK YEL
#1
RY-PA
BLK
L
To convert RY-PA to N/C (normally
External
closed) contact: Move one yellow wire
from "NO" to "NC". (Internal
modification, soldering required.)
TB-20M/D 20-Call Master
TB-AD1
For Door #9
1
2
N
T
R
+
-
Momentary Closure for Station #1
Momentary Closure for Station #9
YEL
#9
RY-PA
BLK YEL
#10
Common for each closure
TB-M/D TERMINAL DEFINITIONS:
+
-
1~10
E
M,C
T
R
S, S
SEPARATE TERMINAL BLOCK:
1~10 (20) Selective negative for each channel
L
IE/IF Door
Station
1
2
Momentary Closure for Station #10
x x
AC Power
for Door
Releases
Power input (18V DC or 16V AC)
Negative
Station number
Common communication
Master-to-Master communication
Transmit to door station
Receive from door station
Output to call extension speaker
Common Positive output for selective closure
Special
Order
Products
IE/IF Door
Station
1
2
Relays are activated
when the door
release button is
being pressed while a
station button is
selected.
Pg. 1