Advertisement
Quick Links
ENGLISH
Battery Installation
Your
RCR504BR
universal remote requires 2 new AAA alkaline batteries (sold sepa-
rately).
To install the batteries:
1. Turn the unit over, and remove the battery compartment cover.
2. Insert the batteries, matching the batteries to the (+) and (-) marks inside
the battery case.
Battery Precautions:
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargable (nickel-cadmium) batteries.
• Always remove old, weak or worn-out batteries promptly and recycle or dispose of them in
accordance with Local and National Regulations.
Programming with Direct Entry
To program your remote to control up to four
components, follow these steps:
1. Manually turn on the component you wish to
program the remote to operate.
2. Find the four-digit code for your brand of TV,
VCR, DVD, satellite receiver, cable box, or
digital TV converter in the enclosed code lists.
3. Press and hold the
CODE SEARCH
key until the indicator light turns on.
4. Release the
CODE SEARCH
key.
5. Press and release the
TV, VCR
or
DVD•AUX
SAT·CBL·DTC
key. The indicator light
blinks and then remains lit.
Note: DTC references digital TV converter.
To program the
DVD·AUX
key: Press the
DVD·AUX
key. The indicator light continues
to blink until you select the component
you want the
DVD·AUX
key to control. To
control a DVD, press the
VCR
key. To control
a TV, press the
TV
key. To control a satellite
receiver, cable box, or digital TV converter,
press the
SAT·CBL·DTC
key. The indicator
light stops blinking and remains lit.
6. Enter the four-digit code, using the numeric
keypad. After the code is entered, the
indicator light turns off.
Note: If the indicator light blinks multiple times, you've
entered an invalid code. Start from step 2 again.
7. Aim the remote at the component and
press the
ON·OFF
key. The component
should turn off.
Note: If your component does not respond, try all the
codes for your brands. If the codes do not work or your
brand is not listed, try the Code Search Method that
follows.
ENGLISH
2
Programming With Code Search
If your TV, VCR, DVD, satellite receiver, cable box, or digital TV converter does not
respond after you have tried all the codes for your brands, or if your brand is not
listed, try searching for your code via the Code Search Entry Method. To program
your remote via the Code Search Entry Method, follow these steps:
1. Manually turn on the component you
wish to program the remote to operate.
2. Press and hold the
key until the indicator light turns on.
3. Release the
4. Press and release the component key you
wish the remote to control—
SAT·CBL·DTC
blinks once and remains lit.
Important: Find the ENTER key on your remote
(don't press it yet). You will need to press this key
quickly in step 6 below.
To program the DVD·AUX key: Press the
DVD·AUX
key you wish the
For DVD, press the
by the
VCR
component, press the
followed by the corresponding component
key (
TV, VCR, SAT·CBL·DTC
5. Press and release the ON·OFF key until
INDICATOR
the component turns off.
CODE
LIGHT
SEARCH
Important: You may have to press the ON·OFF key
up to 200 times.
6. As soon as the component turns off, press the ENTER key within 4 sec-
onds. The indicator light turns off.
Note: If you wait longer than 4 seconds to press ENTER, the remote goes to the next code—you
will need to start the code search from step 1 again.
(BLINK)
SAT•CBL• DTC VCR
TV
Menu Function – TV, VCR, DVD, SAT•CBL•DTC
The Menu function on your remote is used to make changes on selected settings.
The
MENU
varies from brand to brand.
The TV Menu is used to make changes in the TV settings, such as changing color,
channels and timers.
screens to make changes to settings. The VCR or DVD Menu you can navigate to
languages, subtitles and more.
(OFF)
While in Menu Mode, these keys function as follows:
ON•OFF
TV, SAT•CBL•DTC,
To use the Menu function, follow these steps:
1. Press the component button whose menu
you wish to access (
SAT·CBL·DTC
2. Press the
ponent is shown.
Note: Some functions of some brands may not be fully supported.
ENGLISH
CODE
SEARCH
CODE SEARCH
CODE SEARCH
key.
TV, VCR
or
key. The indicator light
DVD•AUX
SAT•CBL• DTC VCR
key, followed by the component
ON•OFF
DVD·AUX
key to control.
DVD·AUX
key, followed
key. For an auxiliary
DVD·AUX
key,
ENTER
).
key operates in TV, VCR, DVD and SAT•CBL•DTC Modes. Each menu
The SAT•CBL•DTC Menu navigates through the Menu
Mode
Vol up/ down
Ch +/-
Cursor moves right/left
Cursor moves up/down
VCR, DVD
DVD•AUX
SAT•CBL• DTC VCR
TV, VCR, DVD·AUX
or
).
MENU
key. The menu of the chosen com-
3
3. To exit the menu mode press the correspond-
ing component key on the remote (
DVD·AUX
or
SAT·CBL·DTC
Special Notes for Menu Use
1. In the Menu Mode of RCA, GE and PROSCAN TVs, pressing the
the highlighted item. The numeric keys may also be used to select the menu choice.
INDICATOR
2. For SONY components, pressing the
LIGHT
to the previous menu.
Accessing Digital Channels
The INPUT and — (dash) key lets you enter a digital sub-channel number, like 59.1,
(BLINK)
directly. Use the number keys to enter the main channel number (in this case, "59").
TV
Then press the INPUT (–) key and press the subchannel number (in this case, "1"). The
INPUT key has two other functions as well: (1) it toggles through all the video sources
connected to your TV; and (2) when the remote is in VCR mode, this button toggles
between VCR and the TV input.
Care and Maintenance
• Keep the remote dry. If it gets wet, wipe it dry immediately.
• Use and store the remote only in normal temperature environments.
• Handle the remote gently and carefully. Don't drop it.
(OFF)
• Keep the remote away from dust and dirt.
• Wipe the remote with a damp cloth occasionally to keep it looking new.
• Modifying or tampering with the remote's internal components can cause malfunction
and invalidate its warranty.
90 Day Limited Warranty
Audiovox Electronics Corporation warrants that for 90 days from date of purchase, it will
replace this product if found to be defective in materials or workmanship. Return it to the
address below for a replacement with a current equivalent. This replacement is the company's
sole obligation under this warranty. ANY IMPLIED WARRANTY OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR USE IS DISCLAIMED. This warranty excludes defects or
damage due to misuse, abuse, or neglect. Incidental or consequential damages are disclaimed
where permitted by law. This warranty does not cover product purchased, serviced or used
outside the United States or Canada.
U.S.A.: Audiovox Electronics Corporation, 150 Marcus Blvd., Hauppauge, New York 11788
CANADA: Audiovox Return Center, c/o Genco, 6685 Kennedy Road, Unit 3, Door 16,
Mississauga, Ontario L5T 3A5
TV
MENU
ENGLISH
DVD•AUX
SAT•CBL• DTC VCR
TV
TV, VCR,
).
MENU
key selects
ENTER
key while in Menu Mode returns
4
Advertisement
