Lexmark X500 And X502N - Lexmark CX310 Compatibility Manual

Printer specifications
•
If zone coating of the adhesive is not possible, remove a 1.6 mm (0.06 in.) strip on the leading and driver edge, and
use a non‑oozing adhesive.
•
Portrait orientation works best, especially when printing bar codes.
When printing on card stock:
•
Make sure the Paper Type is Card Stock.
•
Select the Paper Texture setting.
•
Be aware that preprinting, perforation, and creasing may significantly affect the print quality and cause jams or
other paper handling problems.
•
Check with the manufacturer or vendor to ensure the card stock can withstand temperatures up to 210°C (410°F)
without releasing hazardous emissions.
• Do not use preprinted card stock manufactured with chemicals that may contaminate the printer.
•
Use grain short card stock when possible.
For more information, see "Maintenance procedures" on page 14.

Lexmark X500 and X502n

Limit label printing to occasional use of paper office labels designed for laser printers. The Lexmark X500 and X502n
do not support vinyl or polyester labels.
The Lexmark X500 and X502n support 90–210 g/m
and Tray 2.
Tray 1 supports approximately 120 sheets of card stock and Tray 2 supports up to 250 sheets of card stock. The following
table lists the maximum weights supported.
2
(24–55 lb) stock. Card stock and labels are supported from Tray 1
121