Eclipse CD5435 Owner's Manual
  1. Manuals
  2. Brands
  3. Eclipse Manuals
  4. Car Stereo System
  5. CD5435
  6. Owner's manual

Eclipse CD5435 Owner's Manual

Eclipse - fujitsu ten cd receiver with mp3/wma decoder and remote owner's manual
Hide thumbs
Table of Contents

Advertisement

Quick Links

OWNER'S MANUAL
CD5435
ESN E5 High-Power "Full-Face" CD Receiver with MP3/WMA
Decoder and Remote
We appreciate your purchase of this receiver.
Please read through this manual for correct operation.
We suggest that after reading it you keep this manual
in a safe place for future reference.

Advertisement

Table of Contents
loading

Related Manuals for Eclipse CD5435

Summary of Contents for Eclipse CD5435

  • Page 1 OWNER'S MANUAL CD5435 ESN E5 High-Power "Full-Face" CD Receiver with MP3/WMA Decoder and Remote We appreciate your purchase of this receiver. Please read through this manual for correct operation. We suggest that after reading it you keep this manual in a safe place for future reference.
  • Page 2 Warnings and caution signs, illustrated below, are posted throughout this manual as well as on the CD5435. They show safe and correct ways to handle the product so as to prevent personal injury to you, others and to avoid property damage.
  • Page 3 ● Before drilling holes in a vehicle for installation, you must confirm the locations of pipes, tanks, electrical wiring, and other vehicle systems and components to ensure that there will be no interference or contact. In addition, you must also apply rust prevention and leak prevention measures at the drilling area.
  • Page 4 ● Some equipment uses batteries. Never install equipment where young children can get access to batteries. swallowed, seek medical attention immediately. ● When vehicle is moving, never take your eyes off the road to make adjustments to the equipment. You must pay attention to the road to avoid accidents, do not let the operation or adjustment of the equipment distract you from proper vehicle operation.
  • Page 5 ● Wiring and installing this equipment requires expertise and experience. Professional installation is recommended. Consult with your dealer or a professional installer. Incorrect wiring may damage the equipment or interfere with safe vehicle operation. ● Use only the accessory parts as specified. Using other parts may cause damage to the equipment or cause parts to fall or fly off the equipment.
  • Page 6 ● Avoid hot surfaces when wiring equipment. High temperatures may damage wiring, causing shorts, arcing and fires. ● When changing the installation location for this equipment, please consult the dealer where you bought it for safety reasons. Expertise is necessary for removal and installation. ●...
  • Page 7 ● Do not short, disassemble or heat the batteries, or place them in fire or water. Fire and injuries may result from battery rupture and leakage. ● Store the remote control in a place away from direct sunlight, high temperatures, and high moisture levels. The case may change shape, and the batteries may rupture and leak.

  • Page 8: Table Of Contents

    Table of Contents Operating precautions... 13 Notes on operation... 13 About compact discs ... 14 About cleaning a CD ... 16 Names of controls and parts ... 17 ESN security operating procedure... 18 About ESN ... 18 How to operate the ESN (Key CD) security ... 19 How to program the Key CD...
  • Page 9 Changing illumination Color... 42 Making changes with Function Mode... 43 Disabling the guide tone feature (for button operation) ... 44 Clock display on/off... 45 Setting the time... 46 Setting the steering switch function (U.S.A. only)... 47 Others ... 51 Adjustment of the front panel angle ... 51 How to operate the CD player...
  • Page 10 How to operate the tuner... 66 Tuning to a station ... 66 Entering stations into memory automatically (The automatic preset mode: ASM)... 67 Manually setting stations into memory ... 68 Preset station scan ... 69 Changing the reception sensitivity for automatic scanning ... 70 Changing the radio band location ...
  • Page 11 How to operate the receiver with an optional CD changer connected ... 88 Listening to a CD ... 88 Advancing to the next track or returning to the beginning of the track being played ... 88 Fast Forward/Rewind ... 88 Playing the beginning of tracks (SCAN)...
  • Page 12 Specifications... 111 Before installation... 113 Components... 113 Installation angle ... 113 Mounting instruction ... 114 Mounting the main unit... 114 Names of lead wires and destinations ... 117 System ... 118 How to contact customer service... 123...

  • Page 13: Operating Precautions

    Operating precautions <Your CD5435 will perform well over a long period of time through correct handling and care.> Notes on operation ● For your safety, play only at volume levels that allow outside sounds to be heard. ● We recommend using with this player a disc with the ●...

  • Page 14: About Compact Discs

    Operating precautions About compact discs ● The signal recorded on a compact disc is read by a laser beam, so nothing touches the disc surface. A scratch on the recorded surface or a badly warped disc may cause deteriorated sound quality or intermittent playback. Observe the following precautions to ensure high quality sound performance: ●...
  • Page 15 About brand new CDs ● You may notice that some brand new discs are rough around the center hole or outside edge. Remove the rough edges with the side of a ballpoint pen, etc. Rough edges may prevent proper loading in the deck. Flakes from the rough edges may also stick to the recorded surface and interfere with playback.

  • Page 16: About Cleaning A Cd

    Operating precautions About borrowed CDs ● Do not use a CD with glue or remnants of adhesive tape or labels. They may cause the CD to get stuck inside or damage the deck. How to remove CDs ● When removing the ejected disc, pull it straight out along the slot.

  • Page 17: Names Of Controls And Parts

    Names of controls and parts Front view With the front open Never place an object or rest your hands or the like on the front panel. ] button [AUDIO CONTROL] button Adjusts volume and performs other functions. [DISC] button [TILT] button [SOUND] button [FUNC] button [SEL] button...

  • Page 18: Esn Security Operating Procedure

    ESN security operating procedure ESN security operating procedure About ESN This deck incorporates ESN (ECLIPSE Security Network). The ESN is a security system which disables all deck functions when the power is restored if the deck is stolen from the vehicle. Once the ESN is activated, removing power to the deck or vehicle will activate the security feature.

  • Page 19: How To Operate The Esn (Key Cd) Security

    ● If a security is activated, programming the Key CD is not available. Press the [CD ] button. The front panel opens; The CD5435 is now ready for your Key CD in the CD slot. Insert the CD into the slot.

  • Page 20: How To Cancel The Key Cd

    A [SEC] message appears, then in two seconds it will change to [DISC]. Press the [CD ] button. The front panel opens; The CD5435 is now ready to your Key CD in the CD slot. If a CD has already been inserted, a [SEC] message appears, and then the front panel opens and the CD is ejected.

  • Page 21: How To Change The Key Cd

    "What happens if an incorrect CD is inserted?" on page 22. ● You must be use the same CD used for Key CD programming; a duplicate CD may not work properly. ESN security operating procedure [FUNC] button Button [6] ] button, then the CD5435 is...

  • Page 22: What Happens If An Incorrect Cd Is Inserted

    ESN security operating procedure What happens if an incorrect CD is inserted? After the 5th incorrect attempt, the display reads [HELP] for five seconds. After the [HELP] message will appear for five seconds, serial number will appear. Press the [CD ] button to close the front panel. Press button [6], then the [FUNC] button, and hold them for five seconds.

  • Page 23: How To Turn The Security Indicator On/Off

    Button [2] How to turn the security indicator on/off Once ESN security is activated, the indicator flashes whenever the vehicle's ignition switch is turned off, warning potential thieves that the unit is protected. However, if do not want this visible deterrent, it may be turned off.

  • Page 24: How To Read The Electronic Serial Number

    [ESN] appears on the display, followed by an eight-digit number; this number is your electronic serial number (ESN). You may use this number to identify your Eclipse CD5435 in the event of theft recovery.

  • Page 25: Basic Operation

    Basic operation [PWR] button This section covers basic operating procedures. For additional details, please refer to the sections on specific functions. Turning the power on and off When the power is turned on, the state used when the power was turned off such as CD and tuner playback is restored.

  • Page 26: Listening To Cd

    Basic operation ] button [DISC] button Listening to CD Press the [CD The front panel opens. Insert a CD into the disc slot, label side up. The CD will immediately start playing. When a CD is already loaded, press the [DISC] button to switch to the CD mode.

  • Page 27: Listening To The Tuner

    [FM AM] button Listening to the tuner Press the [FM AM] button. This will turn the tuner on. Press the [FM AM] button for less than one second to switch to the desired FM or AM bands. Radio bands will switch from FM1 ➔ FM2 ➔ FM3 ➔ AM in order each time the button is pressed.

  • Page 28: Adjusting Audio Volume

    Basic operation [MUTE] button [AUDIO CONTROL] button Adjusting audio volume Turn the [AUDIO CONTROL] button to the left or right. Turn to the right: Increases the volume. Turn to the left: Decreases the volume. Press the [MUTE] button for less than one second to cut the volume or restore it instantly.

  • Page 29: Switching Audio Control Modes

    [AUDIO CONTROL] button Switching audio control modes Various audio control modes may be fine-tuned using this procedure. Press the [AUDIO CONTROL] button for less than one second to select the item to be adjusted. Modes will switch in the order shown below each time the button is pressed.

  • Page 30: Mid (Middle) Mode

    Basic operation [AUDIO CONTROL] button MID (MIDDLE) Mode Adjusts middle level. Mid mode can be adjusted for each source (CDP/CDC, FM and AM). Turn the [AUDIO CONTROL] button to the left or right. Turn to the right: Emphasizes medium sounds. Turn to the left: TREB (TREBLE) Mode Adjusts treble level.

  • Page 31: Svc (Source Volume Control) Mode

    [AUDIO CONTROL] button SVC (Source Volume Control) Mode You can set different volume levels for each audio mode. The volume for the initial FM mode (default value: 40) is used as a reference for storing the differences in volume that have been set for each audio mode.

  • Page 32: Loud Mode

    Basic operation [AUDIO CONTROL] button Turn the [AUDIO CONTROL] button to the left or right. Turn to the right: Increases the SVC setting value. Turn to the left: The volume difference can be set within a range of -10 to +20. If the battery terminals have been disconnected because of a reason such as vehicle maintenance, the SVC settings will return to their default values.

  • Page 33: Recording User Presets For The Equalizer

    [AUDIO CONTROL] button Recording user presets for the equalizer The adjustment values for BASS, MIDDLE and TREBLE settings made in the audio control mode can be stored. The stored adjustment values can be called by changing the equalizer mode. For detail, see "Changing the equalizer mode"...

  • Page 34: How To Operate The Sound Adjustment Mode

    Basic operation How to operate the Sound Adjustment Mode About Sound Adjustment Mode The system has several features that allow you to adjust the acoustic characteristics inside the cabin. In the Sound Adjustment Mode, the following characteristics can be adjusted. Crossover The frequency band that is stored by audio media such as CDs is a fairly wide range from 20 Hz to 20 kHz, and it is difficult for a single...
  • Page 35 ● The crossover function is a filter that allocates specified frequency bands. ● A high-pass filter (HPF) is a filter that cuts out frequencies that are lower than the specified frequency (bass range) and allows higher frequencies (treble range) to pass through. ●...

  • Page 36: Making Changes With Sound Adjustment Mode

    Basic operation [SOUND] button [SEL] button Making changes with Sound Adjustment Mode Press the [SOUND] button for more than one second. The mode will change to sound adjustment mode. Turn the [SEL] button to select a setting item. When the button is turned, the setting item changes in the following order and selected item is highlighted.

  • Page 37: Crossover Adjustment (X-Over Fr)

    Crossover adjustment (X-Over FR) Adjusts front and rear speaker HPF (High Pass filter). The system allows you to select from several cut off frequencies: PASS, 80Hz and 100Hz. Turn the [SEL] button to select the cut-off frequency. When the button is turned, the frequency changes in the following order.

  • Page 38: Crossover Adjustment (X-Over Nf)

    Basic operation Crossover adjustment (X-Over NF) Adjusts woofer (non-fader output) LPF (Low Pass filter). The system allows you to select from several cut off frequencies: PASS, 80Hz and 100Hz. Turn the [SEL] button to select the cut-off frequency. When the button is turned, the frequency changes in the following order.

  • Page 39: Non-Fader Phase Selection (Non-F Phase)

    Non-fader phase selection (NON-F Phase) The merging of sound between the front and rear speakers and the woofer can be improved by selecting the phase. Switch the phase to a phase which lets the speakers combine without any disharmony. Turn the [SEL] button to select NORMAL or REVERSE.

  • Page 40: Making Changes With Display Adjustment Mode

    Basic operation Making changes with Display Adjustment Mode This function allows adjustment of display contrast and changing illumination colors. Press the [DISP] button for less than one second. The display adjustment mode is activated. Turn the [SEL] button in either direction to display setting items for selection.

  • Page 41: Contrast Adjustment

    Contrast adjustment Adjust the display contrast to the best level in accordance with the angle of viewing. Turn the [SEL] button to select CONTRAST. Press the [SEL] button. Enters contrast adjustment mode. Turn the [SEL] button to adjust contrast. When the button is turned, the contrast level changes in the following order.

  • Page 42: Changing Illumination Color

    Basic operation [SEL] button [DISP] button [RTN] button Changing illumination Color Turn the [SEL] button to select ILL COLOR. Press the [SEL] button. The screen for changing the illumination color will appear. Turn the [SEL] button to select illumination color. When the button is turned, the illumination color changes in the following order.

  • Page 43: Making Changes With Function Mode

    Making changes with Function Mode A variety of settings can be changed. Press the [FUNC] button for less than one second. The function mode is activated. Turn the [SEL] button in either direction to display setting items for selection. When the button is turned, the setting item changes in the following order.

  • Page 44: Disabling The Guide Tone Feature (For Button Operation)

    Basic operation Disabling the guide tone feature (for button operation) The receiver is set at the factory to emit a beep tone in response to button operation. The guide tone feature may be disabled in the following procedure: Turn the [SEL] button to select GUIDE TONE. Press the [SEL] button.

  • Page 45: Clock Display On/Off

    Basic operation [FUNC] button [SEL] button [RTN] button Clock display on/off Switches the clock display to ON/OFF. Turn the [SEL] button to select CLOCK DISP. Press the [SEL] button. The clock display ON/OFF mode is activated. Turn the [SEL] button to select ON or OFF. Press the [SEL] button.

  • Page 46: Setting The Time

    Basic operation [FUNC] button [SEL] button [RTN] button Setting the time This receiver uses the 12-hour display notation. Turn the [SEL] button to select CLOCK ADJ. Press the [SEL] button. The clock adjustment mode is activated. Press the [SEL] button to display the item to be selected for adjustment.

  • Page 47: Setting The Steering Switch Function (U.s.a. Only)

    CD5435 is installed. The ECLIPSE website (E-iSERV) provides software that enables steering switch operation even with the installation of the deck. Import this software into your CD5435. For details, contact the store from which you purchased your deck.
  • Page 48 Basic operation ] button Reading steering switch data The steering switch data that has been download from E-iSERV (website) to a CD-R can be loaded into the deck and saved there. Press the [FUNC] button for less than one second. The function mode is activated.
  • Page 49 ● The deck can only import file from CD-Rs that have been written in root directories. Automatic creation XXXXXXXX.ssw File extension ● Disc formats that may be used are as follows: • CD-ROM (MODE 1) • CD-ROM (MODE2_FORM 1) *CD-ROMs written in MODE2_FORM2 cannot be read. ●...
  • Page 50 Basic operation Compatibility with various switches Displays the compatibility of the system’s modes and the steering switch. Switch Name SEEK+ SEEK- VOL+ VOL- MODE Switch Name SEEK+ SEEK- VOL+ VOL- MODE : Switch names change depending on vehicle make and model. : If an optional SIRIUS satellite radio tuner is connected, categories can be switched when in the satellite mode.

  • Page 51: Others

    [TILT] button ] button Others Adjustment of the front panel angle Display angle can be adjusted. Push and hold the [TILT] button with the display completely closed. While pushing the [TILT] button, the display will gradually open. When the display has opened to the desired angle, release the [TILT] button.

  • Page 52: How To Operate The Cd Player

    How to operate the CD player How to operate the CD player [DISC] button First press the [DISC] button for less than one second to switch to the disc mode. It is assumed here that a CD has already been loaded into the unit. Listening to CDs Press the [DISC] button for less than one second to switch to the CD player mode.

  • Page 53: Advancing To The Next Track Or Returning To The Beginning Of The Track Being Played

    Advancing to the next track or returning to the beginning of the track being played Turn the [SEL] button to the left or right. Turn to the right: Advances to the next track. Turn to the left: Fast Forward/Rewind Fast forward or rewind the song currently being played. Press and hold the [ [ ] button: Fast forward.

  • Page 54: Repeating The Same Track (Repeat)

    How to operate the CD player Repeating the same track (REPEAT) Press the [5 RPT] button to repeat the track being played. To cancel, press the [5 RPT] button again. Playing tracks in random order (RANDOM) Press the [6 RAND] button to play the tracks in random order.

  • Page 55: Ejecting The Disc

    ] button Ejecting the disc Press the [CD The front panel opens and the disc is ejected. Remove the disc and press the [CD The front panel closes. If left alone for 15 seconds after the disc ejection, the front panel closes after the BEEP sound. ●...

  • Page 56: Displaying Cd Text

    How to operate the CD player Displaying CD TEXT Only the built-in CD player supports CD TEXT. It can not be displayed with the optional CD changer. If the CD came with a logo shown below, it is recorded with a disc title and track titles. These information will be displayed during playback.

  • Page 57: How To Operate The Mp3/Wma Player

    How to operate the MP3/WMA player About MP3/WMA The making of MP3/WMA files by recording from sources such as broadcasts, records, recordings, videos and live performances without permission from the copyright holder for uses other than personal enjoyment is prohibited. What is MP3/WMA? MP3 (MPEG Audio Layer III) is a standard format for audio compression technology.

  • Page 58: Id3/Wma Tags

    How to operate the MP3/WMA player ID3/WMA tags MP3/WMA files have an "ID3/WMA Tag" that allows input of information so that data such as song title and artist can be saved. This deck supports ID3v.1.0, 1.1 and WMA tags. Media Media capable of playing MP3/WMA includes CD-R and CD-RW discs.

  • Page 59: Format Of Discs

    Format of discs The format of discs to be used must be ISO9660 Level 1 or Level 2. Control items for this standard are as follows: ● Maximum directory layers: ● Maximum characters for folder names/file names: 32 (including "." and 3 ●...

  • Page 60: Multi-Sessions

    How to operate the MP3/WMA player Multi-sessions Multi-sessions are supported, and playing of CD-R and CD-RW discs with annotated MP3/WMA files is possible. However, when "Track at once" has been written, close the session or process the warning message. Standardize the format of each session without changing the format.

  • Page 61: Listening To Mp3/Wma File

    [DISC] button Listening to MP3/WMA file Press the [DISC] button for less than one second to switch to the CD player mode. This starts MP3/WMA file play. If an external CD changer is connected, each additional press of the [DISC] button will switch modes from CD changer 1 ➔ CD changer 2 ➔...

  • Page 62: Advancing To The Next Track (File) Or Returning To The Beginning Of The Track (File) Being Played

    How to operate the MP3/WMA player Buttons [1 ] and [2 ] Advancing to the next track (file) or returning to the beginning of the track (file) being played Turn the [SEL] button to the left or right. Turn to the right: Advances to the next track (file). Turn to the left: Skipping to the next or previous folder Press button [1...

  • Page 63: Return To The Root Directory Of The Cd

    How to operate the MP3/WMA player [RTN] button Return to the root directory of the CD In the root directory, when a file cannot replay, the system will return to the first file that can perform a replay. (In the configuration example, the file is returning to 001.mp3.

  • Page 64: Playing The Beginning Of Files (Scan)

    How to operate the MP3/WMA player Playing the beginning of files (SCAN) Press the [4 SCAN] button. Press the button briefly to play just the first 10 seconds of each song for all the files in the same layer of the folder being played. Pressing the button until [FOLD SCAN] is displayed will play just the first 10 seconds of the first song in each folder.

  • Page 65: Playing Files In Random Order (Random)

    Playing files in random order (RANDOM) Press the [6 RAND] button. Press the button briefly to randomly play the files in the same layer as the folder being played. Pressing the button until [ALL RAND] is displayed will randomly play the files in all the folders.

  • Page 66: How To Operate The Tuner

    How to operate the tuner How to operate the tuner [FM AM] button First, press the [FM AM] button to start tuner operation. There are automatic and manual methods for setting stations in memory. The receiver will accept up to 24 stations in memory: 6 in AM and 18 in FM (6 each for FM1, FM2 and FM3.) (Initial setting) Tuning to a station Press the [FM AM] button for less than one second to...

  • Page 67: Entering Stations Into Memory Automatically (The Automatic Preset Mode: Asm)

    [FM AM] button Entering stations into memory automatically (The automatic preset mode: ASM) Press the [FM AM] button for less than one second to switch to the desired FM or AM bands. Radio bands will switch from FM1 ➔ FM2 ➔ FM3 ➔ AM in order each time the button is pressed.

  • Page 68: Manually Setting Stations Into Memory

    How to operate the tuner [FM AM] button Manually setting stations into memory This section covers the setting of stations in memory under the numbered buttons. Press the [FM AM] button for less than one second to switch between FM and AM. Turn the [SEL] button to the right or left to tune to the station to be entered in memory.

  • Page 69: Preset Station Scan

    Preset station scan This function enables reception of all the stations in the preset buttons for five seconds each. Press the [SEL] button for less than two seconds. [P SCAN] will appear on the display, and stations stored under preset buttons [1] through [6] will be played for five seconds each. To stop the preset scan mode at a desired station, press the [SEL] button again.

  • Page 70: Changing The Reception Sensitivity For Automatic Scanning

    How to operate the tuner [FM AM] button Button [1] Changing the reception sensitivity for automatic scanning The deck lets you select the reception sensitivity to be used for automatic scanning of stations. The two sensitivity modes available for this deck are AUTO mode and DX mode.

  • Page 71: Changing The Radio Band Location

    [FM AM] button Changing the radio band location The location for the radio bands used between the North American region and the Asia/Australia/Latin region can be switched. The default setting is USA (North America). When an optional HD Radio tuner unit is connected, radio band location is set to USA.

  • Page 72: Fm Reception Characteristics

    How to operate the tuner FM reception characteristics In general, FM has much better tonal quality than AM. However, FM and FM stereo reception encounter several characteristic problems not encountered with AM. FM is more difficult to receive than AM in a moving vehicle. The following are explanatory notes on what to expect from FM reception and on how to get satisfactory performance.

  • Page 73: Reception Area Of Fm Broadcasts

    Reception area of FM broadcasts A home receiver can catch weak FM stereo signals through the use of a tall, directional or ultra-sensitive antenna. In a moving vehicle, the area for good reception is limited because of varying conditions encountered while driving, including the types and heights of broadcast antenna structures, signal strength, engine noise, etc.

  • Page 74: How To Operate The Area Shot Function (U.s.a. Only)

    With the AREA SHOT function, road information such as the direction of travel and the street names of turn intersections can be downloaded from the ECLIPSE website (E-iSERV), imported into the CD5435, and shown on the display To use the AREA SHOT function...

  • Page 75: Reading The Area Shot Data

    Reading the AREA SHOT data The AREA SHOT data that has been downloaded from E-iSERV (web site) to a CD-R can be loaded into the deck and saved there. Press the [FUNC] button for less than one second. The function mode is activated. Turn the [SEL] button to select AREA SHOT.
  • Page 76 How to operate the AREA SHOT function (U.S.A. only) Press the [SEL] button. The selected file will be saved. While the files are being read [READING...] will appear. When reading has finished, [COMPLETED] will appear on the display and then it will return to the display for selecting the function mode. ●...

  • Page 77: Changing The Area Shot Mode

    [MUTE] button Changing the AREA SHOT mode Press the [MUTE] button for more than one second. The AREA SHOT mode is activated. Information such as intersection street names and the direction of turns are displayed in text and with arrows. Pressing and holding the [MUTE] button a second time, closes the AREA SHOT mode.

  • Page 78: Using The Area Shot Mode

    How to operate the AREA SHOT function (U.S.A. only) Using the AREA SHOT mode By manually switching between guidance points, both previous and next guidance points can be confirmed during guidance. Intersection street names and the direction of turns are shown on the display in text and with arrows.

  • Page 79: Display Arrows

    Display Arrows Arrows for indicating turn directions are displayed as follows. Diagonally forward right Right Diagonally rear right Depending on driving conditions, arrows indicate the following: Expressway Traffic merges to the right Traffic merges to the left Right hand entrance Left hand entrance A right hand...

  • Page 80: How To Use The Remote Control

    How to use the remote control How to use the remote control Precautions in use of the remote control ● Be careful when handling the remote control, especially because it is small and light. Dropping or striking it hard may damage it, wear out the battery or cause a malfunction.

  • Page 81: Turning The Power On/Off

    Remote-control light receptor Turning the power on/off When the power is turned on, the state used when the power was turned off such as CD and tuner playing is restored. Press the [PWR] button. The power turns on or off each time the button is pressed. When the main unit is shut down, the remote control will not work.

  • Page 82: Switching Playback Modes

    How to use the remote control [TU] button [BAND] button Switching playback modes Press the [MODE] button. Press the button to switch modes in the following sequence: Modes can be switched by pressing the following buttons: [TU] button : [DISC] button : The disc mode is activated. [AUX] button : The AUX mode is activated.

  • Page 83: Selecting A Station (Manually Or Automatically)

    [BAND] button [ PRESET CH Selecting a station (manually or automatically) A short press of the button will allow manual station tuning. Pressing for more than one second will start automatic tuning. Press the [ [ ] button: Tunes to higher frequency stations. [ ] button: Tunes to lower frequency stations.

  • Page 84: Advancing To The Next Track Or Returning To The Beginning Of The Track Being Played

    How to use the remote control [BAND] button DISC Advancing to the next track or returning to the beginning of the track being played Press the [ ] button: Advances to the next track. ] button: Returns to the beginning of the track being played. Hold the [ through the track being played.

  • Page 85: How To Play Mp3/Wma

    [BAND] button DISC How to play MP3/WMA Switching disc modes Press the [DISC] button. The disc mode is activated. Press the [BAND] or [DISC] button. When one or two CD changers are connected, press the [BAND] or [DISC] button to change modes from CD player ➔ CD changer 1 ➔...

  • Page 86: Replacing The Battery

    How to use the remote control Replacing the battery To prevent accidents, store batteries out of the reach of children. If a child has swallowed one, consult a doctor immediately. Use two AAA size batteries. Remove the back cover of the remote control unit by gently pressing and sliding it in the direction indicated by the arrow.
  • Page 87 ● Be extremely careful not to swallow the battery. ● The battery life is approximately one year. If the remote control unit does not operate correctly or if the button lamp gets dim, replace the batteries. ● Be sure to orient the batteries correctly so that the positive and negative poles match the diagram.

  • Page 88: How To Operate The Receiver With An Optional Cd Changer Connected

    How to operate the receiver with an optional CD changer connected How to operate the receiver with an optional CD changer connected [DISC] button This section covers the operation of an optional CD changer that is connected to the receiver. To switch from another mode, press the [DISC] button for less than one second.

  • Page 89: Playing The Beginning Of Tracks (Scan)

    Playing the beginning of tracks (SCAN) Press the [4 SCAN] button. Pressing the button for less than one second causes the changer to move up to the next track and play it for 10 seconds, then move up to the next track and play it for 10 seconds, and so on, on one CD, until the button is pressed again.

  • Page 90: Playing Tracks In Random Order (Random)

    How to operate the receiver with an optional CD changer connected Button [1 Playing tracks in random order (RANDOM) Press the [6 RAND] button. Pressing on the button for less than one second causes the changer to play the tracks on the currently playing CD in random order, until the button is pressed again.

  • Page 91: Specifying A Cd To Play

    Specifying a CD to play A CD of your choice is directly selectable out of the loaded discs. Press the [SEL] button for less than one second. Press a button from [1] to [6]. Buttons To select a CD from nos. 7 to 12, press the desired button considerably longer.

  • Page 92: How To Operate The Tuner When The Optional Hd Radio Tuner Connected (U.s.a. Only)

    How to operate the tuner when the optional HD Radio tuner connected (U.S.A. only) How to operate the tuner when the optional HD Radio tuner connected (U.S.A. only) About HD Radio If the optional HD Radio (High Definition Radio) tuner unit is connected, terrestrial digital broadcasts can be received.

  • Page 93: Tuning To A Station

    [FM AM] button First, press the [FM AM] button to start tuner operation. There are automatic and manual methods for setting stations in memory. The receiver will accept up to 24 stations in memory: six in AM and 18 in FM (6 each for FM1, FM2 and FM3.) (Initial setting) Tuning to a station Press the [FM AM] button for less than one second to switch to the desired FM or AM bands.

  • Page 94: Entering Stations Into Memory Automatically (The Automatic Preset Mode: Asm)

    How to operate the tuner when the optional HD Radio tuner connected (U.S.A. only) [FM AM] button Entering stations into memory automatically (The automatic preset mode: ASM) Press the [FM AM] button for less than one second to switch to the desired FM or AM bands. Radio bands will switch from FM1 ➔...

  • Page 95: Manually Setting Stations Into Memory

    [FM AM] button Manually setting stations into memory This section covers the setting of stations in memory under the numbered buttons. Press the [FM AM] button for less than one second to switch between FM and AM. If the optional SIRIUS satellite radio tuner unit is connected, radio mode will be switched between the satellite radio mode and FM AM radio mode by pressing the [FM AM] button for more than one second.

  • Page 96: Preset Station Scan

    How to operate the tuner when the optional HD Radio tuner connected (U.S.A. only) Preset station scan This function enables reception of all the stations in the preset buttons for five seconds each. Press the [SEL] button for less than two seconds. [P SCAN] will appear on the display, and stations stored under preset buttons [1] through [6] will be played for five seconds each.

  • Page 97: Switching Between Displays When Receiving Hd Radio

    Switching between displays when receiving HD Radio During digital reception, the name of the station being received and other information can be displayed. Press the [DISP] button for more than one second. Each time the button is pressed the display item changes in the following order: Station name ➔...
  • Page 98 How to operate the tuner when the optional HD Radio tuner connected (U.S.A. only) Turn the [SEL] button to select AUTO or OFF. In the [AUTO] setting, the selection is switched between digital and analog reception automatically. In areas where digital reception is not possible, reception is automatically switched to analog to avoid loss of reception.

  • Page 99: How To Operate The Tuner With An Optional Sirius Satellite Radio Tuner Connected (U.s.a. Only)

    How to operate the tuner with an optional SIRIUS satellite radio tuner connected (U.S.A. only) How to operate the tuner with an optional SIRIUS satellite radio tuner connected (U.S.A. only) About SIRIUS satellite radio If the optional SIRIUS satellite radio tuner unit is connected, satellite radio broadcast can be received.

  • Page 100: Selecting The Radio Mode

    How to operate the tuner with an optional SIRIUS satellite radio tuner connected (U.S.A. only) [FM AM] button The receiver will accept up to 24 stations in memory. Selecting the radio mode Press the [FM AM] button for more than one second. The mode switches between satellite radio mode and FM/AM radio mode each time the button is pressed.

  • Page 101: Category Selection

    How to operate the tuner with an optional SIRIUS satellite radio tuner connected (U.S.A. only) Buttons [1] to [3] Category selection The channel can be selected from among categories such as POP and ROCK. Consult the SIRIUS website for details of categories. Press the [ Categories will switch in order shown below each time button is pressed.

  • Page 102: Manually Setting Channels Into Memory

    How to operate the tuner with an optional SIRIUS satellite radio tuner connected (U.S.A. only) Manually setting channels into memory This section covers the setting of channels in memory under the numbered buttons. Turn the [SEL] button to the right or left to tune to the channel to be entered in memory.

  • Page 103: Preset Channel Scan

    How to operate the tuner with an optional SIRIUS satellite radio tuner connected (U.S.A. only) Preset channel scan This function enables reception of all the channels in the preset buttons for five seconds each. Press the [SEL] button for less than two seconds. [P SCAN] will appear at the display, and channels stored under preset buttons [1] through [6] will be played for five seconds each.

  • Page 104: Others

    Others Others [DISC] button Connecting portable audio players to the AUX jack Use a commonly available accessory cord with the RCA connector to connect a portable audio player to the AUX (auxiliary) jack of this system. Turn on the portable audio player and start its play function.

  • Page 105: Changing Auxiliary Input Sensitivity

    Changing auxiliary input sensitivity The sensitivity of the auxiliary mode can be changed. Press the [FUNC] button for less than one second. The function mode is activated. Turn the [SEL] button to select AUX Sensitivity. The selected item is highlighted. Press the [SEL] button.

  • Page 106: User Registration Key Display

    Others User Registration Key display User Registration Key is your CD5435's unique ID. In order to use the ECLIPSE website (E-iSERV), a 16-digit User Registration Key is necessary. Check that the deck is in standby mode. Press the [DISP] button for more than one second.

  • Page 107: If You Have A Question

    If you have a question: First check the items mentioned below before attempting to troubleshoot problems. If a problem occurs, for instance when the unit does not respond to any button presses, or the display doesn't work correctly, press the [RESET] button using a paper clip or similar item.

  • Page 108: Displayed Information (For Troubleshooting)

    If you have a question: Displayed information (for troubleshooting) The information listed in the chart below is displayed to show the status of the CD, AREA SHOT function, CD changer and SIRIUS satellite radio tuner. Refer to the chart for the appropriate action. Information Contents INFO 2 NO DISC LOADED...
  • Page 109 Mode Problem Is the volume control up sufficiently? Is the muting function in effect (MUTE)? Dead or Is the fader or balance control set far weak sound to one side? Other probable causes include broken audio-signal wiring or a faulty speaker.
  • Page 110 If you have a question: Mode Problem The disc cannot be inserted. The disc is ejected as soon as it is inserted. Or, the disc cannot be ejected. The disc cannot be changed. Sound skips around. Sound is intermittent. Sound is bad in quality. The disc cannot be ejected.

  • Page 111: Specifications

    Specifications <GENERAL> Power Supply Current Drain Dimensions (W x H x D) In-Dash Unit Mass (weight) Usage temperature range Storage temperature range <FM TUNER> Frequency Range USA: Asia: Australia: Latin America: Usable Sensitivity 50dB Quieting Sensitivity Frequency Response Stereo Separation <AM TUNER>...
  • Page 112 Specifications <AUDIO AMPLIFIER> Power Output Output Level/Impedance Tone Control Bass: Middle: Treble: Loudness 14W x 4 (20Hz~20kHz, 1% THD, 4Ω, Vcc=14.4V) Max. 50W x 4 5V/55Ω line-out impedance ±12dB at 80Hz ±12dB at 630Hz ±12dB at 10kHz +10dB at 100Hz/+6.5dB at 10kHz...

  • Page 113: Before Installation

    Before installation ● Note ● Be sure to disconnect the vehicle battery's negative terminal before installing the receiver. Components Main unit Mounting sleeve Side bracket Rear bracket Bezel Bushing Self-tapping screw (6 x 16 mm) Stud bolt Flat head screw (red: 5 x 8 mm) Hex-head bolt (red: 5 x 8 mm) Hex-head bolt (6 x 20 mm) Hex nut (5 mm)

  • Page 114: Mounting Instruction

    Mounting instruction Mounting instruction Mounting the main unit –If installing the main unit by the mounting sleeve– Insert the mounting sleeve into the opening in the vehicle dash board or console box. Use a screwdriver or the like to bend the tabs in the mounting sleeve to secure the mounting sleeve.
  • Page 115 Mount the stud bolt to the main unit. Insert the main unit into the mounting sleeve until it locks in place. Fasten the rear of the main unit using either method [A] or [B]. Some automobiles may be equipped to secure the back of the main unit using the stud bolt and supplied rubber support.
  • Page 116 Mounting instruction –If installing the main unit by the side brackets of the vehicle– Remove the pockets and any other accessories from the center cluster to make room for the main unit. Remove the mounting side brackets for the pocket. CENTER CLUSTER Attach the side brackets to the main unit.

  • Page 117: Names Of Lead Wires And Destinations

    Names of lead wires and destinations (refer to Page 119) ● Caution ● Never connect the power supply to the speaker leads, otherwise it causes damage to the main unit. ● Note ● To prevent unconnected leads from shorting out, insulate them by wrapping their tips with electrical tape.

  • Page 118: System

    Mounting instruction System CD5435 CD5435 CD5435 HDR105 HD RADIO TUNER CD CHANGER CD5435 Note: Adjust the external amplifier’s input level. 21010...
  • Page 119 Mounting instruction...
  • Page 120 Mounting instruction...
  • Page 121 Mounting instruction...
  • Page 122 Mounting instruction...

  • Page 123: How To Contact Customer Service

    How to contact customer service Should the product require service, please contact your nearest Eclipse dealer. <U.S.A/CANADA> DIVISION OF FUJITSU TEN CORP. OF AMERICA 19600 SOUTH VERMONT AVENUE, TORRANCE, CA 90502 Phone: (310) 327-2151 <AUSTRALIA> FUJITSU TEN (AUSTRALIA) PTY LTD. ECLIPSE AUSTRALIA Phone: 1800-211-411 <MALAYSIA>...
  • Page 124 How to contact customer service <KOREA> Transpectra Co., Ltd. 115-16 nonhyun dong kangnam ku Seoul, Korea. Phone: 02-540-4595 Fax: 02-2-540-4666 HYUNDAI AUTONET Co., LTD. 1st FL. Namhyoung Bldg, 746-23 Yeoksam-Dong, Kangnam-Ku, Seoul, Korea 135-080 Phone: 02-508-6001 Fax: 02-2-508-6067 <TAIWAN> Sentrek Taiwan, LTD. 1, 9F, Lane 155, Section 3, Peishen RD., Shenkeng, Taipei Hsien, Taiwan, R.O.C.
  • Page 125 Memo • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •...
  • Page 126 Memo • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •...
  • Page 127 IMPORTANT RECORD YOUR “KEY CD” HERE… STORE YOUR “KEY CD” ALONG WITH YOUR OWNER’S MANUAL TAKE THIS OUT.
  • Page 128 CUSTOMER NOTICE Please retain this booklet and write in the serial number of your CD5435 for identification. The serial number is labeled or stamped on the chassis. Serial No. FUJITSU TEN LIMITED Contact:FUJITSU TEN CORP. OF AMERICA 19600 So. Vermont Avenue, Torrance, CA 90502 Call:800-233-ECLIPSE www.eclipse-web.com...

Table of Contents