Displayed Information (For Troubleshooting) - Eclipse CD5423 Owner's Manual

If you have a question:

Displayed information (for troubleshooting)

The information listed in the chart below is displayed to show the
status of the CD player and CD changer. Refer to the chart for the
appropriate action.
Information Code Table
Information Contents
2 NO DISC LOADED IN
THE MAGAZINE
3 DISCS ARE DIRTY OR
DAMAGED
5 CD PLAYER AND CD
CHANGER FAILS
MECHANICALLY
6 WHEN THE CD CHANGER
INTERNAL TEMPERATURE IS operation. Wait till it cools down.
HIGH (TO PROTECT PICKUP •Resume playing after the "High temperature sensed
UNIT)
7 AN INTERNAL POWER
SUPPLY FAILURE IS
OCCURRING WITH THE
AUTO CHANGER
Information Contents
LOAD
When "INFO " flashes on the indicator
Nos.2~7 are displayed.
Explanation and remedial action to take
There is no disc in the magazine or player. Load
a disc in the magazine. (Load a music disc.)
The loaded disc is dirty or upside down. Check
it for proper orientation and verify it is clean.
•The CD player and CD changer is inoperative for
some reason. Go through the magazine removal
procedure.
•If a magazine fails to eject, have your dealer fix
the problem.
•The temperature in the CD changer is too high for
and CD stopped" display disappears. If the CD still
cannot play, have your dealer repair it.
•Turn the ACC off once before turning it on once
again to resume the operation.
•If the function still cannot be restricted, contact your
dealer.
Explanation and remedial action to take
CD changer is in the process of verifying the
presence of CDs after a magazine has been inserted
into the CD changer.
82