Basic operation
[AUDIO CONTROL] button
Switching audio control modes
Various audio control modes may be fine-tuned using this
procedure.
Press the [AUDIO CONTROL] button for less than one
1
second to select the item to be adjusted.
Modes will switch in the order shown below each time the
button is pressed.
VOL
*:
These mode cannot be adjusted when the Hide-Away EQ/DSP
Sound Processor (2301) is connected.
VOL (VOLUME) Mode
Adjusts volume.
Turn the [AUDIO CONTROL] button to the left or right.
Turn to the right: Increases the volume.
Turn to the left:
BASS Mode
Adjusts bass level.
Turn the [AUDIO CONTROL] button to the left or right.
Turn to the right: Emphasizes low sounds.
Turn to the left:
TREB (TREBLE) Mode
Adjusts treble level.
Turn the [AUDIO CONTROL] button to the left or right.
Turn to the right: Emphasizes high sounds.
Turn to the left:
BASS*
TREB*
Decreases the volume.
Softens low sounds.
Softens high sounds.
24
BAL
FAD
NON-F