Disabling or enabling the touch pad
The touch pad is enabled by default. To enable/disable the touch
pad, do one of the following:
❖
Press the touch pad ON/OFF (
❖
Press
touch pad" on page
Connecting an external device
NOTE
You can easily attach an external device your computer.
To do this:
1
Read the directions that came with the device to see if you first
need to install new software.
2
Connect the device's video or USB cable to the port on the
computer and to the device.
3
Connect the device's power cable to a live electrical outlet
(if applicable).
4
Turn on the external device (if applicable).
Your computer may automatically detect the external device.
Using external display devices
Your computer comes with a built-in display, but you can also
connect the following types of external display devices to the video
ports described below:
NOTE
❖
An HDMI
via the HDMI
❖
An external monitor or projector via the RGB (monitor) port
Using external display devices
. For more information, see
F5
Depending on your system, some models may include USB 3.0
port(s). To distinguish these ports, please look for the blue inset
within the USB 3.0 port (if available).
To locate your HDMI or RGB port, please refer to your Quick Start
document.
®
-compatible television or external display device
®
Out port*
Getting Started
) button.
"Disabling or enabling the
164.
71