Samsung SyncMaster S24B150BL User Manual page 21

1
Preparations
Icons
AUTO
(Power lamp)
Key Guide
Move to the upper or lower menu or adjust the value for an option on the
OSD menu.
Adjust the screen brightness.
Confirm a menu selection.
Pressing the [ ] button when the OSD menu is not displayed will
change the input source (Analog/DVI). If you power on the product or
change the input source by pressing the [
shows the changed input source will appear at the top left corner of the
screen.
Press the [ ] button to automatically adjust the screen settings.
AUTO
Changing the resolution in Display Properties will activate the
Adjustment function.
Turn the screen on or off.
The power indicator will be lit when the product is operating normally.
To reduce power consumption, it is best to remove the power cable
when you will not be using the product for an extended period of time.
When a control button on the product is pressed, the Key Guide will be
displayed before the onscreen menu opens. (The guide shows the
function of the button pressed.)
To access the onscreen menu when the guide is displayed, press the
corresponding button again.
The Key Guide may vary depending on the function or product model.
Refer to the actual product.
Description
] button, a message that
1 Preparations
Auto
21