Changing The Default Settings; Using The Setip Program; Understanding The Keyboard - Samsung SCX-6555N User Manual

Scx-6555n series mono laser multifunction printer
Hide thumbs Also See for SCX-6555N:
Table of Contents

Advertisement

Changing the default settings

You can set the default values for copy, fax, email, scan and paper all at
once.
1. Press Machine Setup on the control panel.
2. Press Admin Setting.
3. When the login message appears, enter password with number keypad
and press OK. (See "Setting the authentication password" on page 29.)
4. Press the General tab > Default Settings > Default Option.
5. Press the function you want to change, and change its settings.
For example, if you want to change the default setting of the brightness
& darkness for a copy job, press Copy > Darkness and adjust the
brightness & darkness.
6. Press OK.

Using the SetIP program

This program is for the network IP setting using the MAC address which is
the hardware serial number of the network printer card or interface.
Especially, it helps the network administrator set several network IPs at the
same time.
The following procedure is based on windows XP. If you use Macintosh or
Linux OS, see Software section
You can only use SetIP program when your machine is connected
to a network.
The following procedure is based on the Windows XP operating
system. If you are using Macintosh or Linux, See Software section.
If you are in a non-static IP address environment and need to
setup a DHCP network protocol, go to the
developer.apple.com/networking/bonjour/download/, select the
program Bonjour for Windows due to your computer operating
system, and install the program. This program will allow you to fix
the network parameter automatically. Follow the instruction in the
installation window. This Bonjour program does not support Linux
You can only use IPv4 setting for SetIP.
Installing the program
1. Insert the driver CD provided along with your machine. When the driver
CD runs automatically, close the window.
2. Start Windows Explorer and open the X drive. (X represents the name
of your CD-ROM drive.)
3. Double-click Application > SetIP.
4. Open the folder of the language you plan to use.
5. Double-click Setup.exe to install this program.
6. Follow the onscreen instructions to complete the installation.
30 _Getting Started
http://
Setting network values
1. Print the machine's network configuration report to find your machine's
MAC address. (See "Printing a report" on page 89.)
2. From the Windows Start menu, select All Programs > Samsung
Network Printer Utilities > SetIP.
3. Click
to open the TCP/IP configuration window.
4. Enter the network card's MAC address, IP address, subnet mask,
default gateway, and then click Apply.
When you enter the MAC address, enter it without a colon(:).
5. Click OK, and then the machine prints the network information. Check
all the settings are correct.
6. Click Exit.

UNDERSTANDING THE KEYBOARD

You can enter alphabet characters, numbers, or special symbols using the
keyboard on the touch screen. This keyboard is specially arranged like a
normal keyboard for better usability for the user.
Touch the input area where you need to enter characters and the keyboard
pops up on the screen. The keyboard below is the default showing the
lowercase letters.
Moves the cursor between characters in the input
Left/Right
1
area.
Deletes the character on the left side of the
Backspace
2
cursor.
Deletes the character on the right side of the
Delete
3
cursor.
Deletes all characters in the input area.
Clear
4
Enters letters within this line.
Input area
5
Toggles between lowercase keys and uppercase
Shift
6
keys or vice versa.
Switches from the alphanumeric keyboard to the
Symbols
7
symbol keyboard.
Enters a blank between characters.
Space
8
Saves and closes input result.
OK
9
Cancels and closes input result.
Cancel
10

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents