Samsung PS64E8000GU Quick Manual page 12

5
Terms of Service Agreement
6
Select Country.
(Depending on the country)
7
Auto Tuning (1): Selecting how
you watch your TV
8
Auto Tuning (2):
Selecting a search options and
Region Selection (Depending
on the country)
9
Clock: Setting the Clock Mode
10
Voice and motion control:
Setting the Voice and Gesture
Control function.
11
Setup Complete
If You Want to Reset This Feature...
Menu → System →Setup
Select System - Setup (Initial Setup). Enter your 4 digit PIN number. The default PIN number is "0-0-0-0". If you want to change the PIN number, use
the Change PIN function.
You should do Setup (Menu → System) again at home although you did in shop.
✎
If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which resets the PIN to "0-0-0-0":
MUTE → 8 → 2 → 4 → POWER
When the Network Settings is completed, The Terms of Service Agreement screen appears.
✎
The screen can take a few seconds to appear.
The General Disclaimer screen appears. Select Agree. The Privacy policy screen appears. Select
Agree.
✎ To use the Smart Hub, you should select Agree from the Terms of Service Agreement.
Select the appropriate country.
✎
After selecting the country in the Country menu, some models may proceed with an
additional option to setup the pin number.
Let's find and store channels on your TV. Do you need to search for channels?
• Yes, I need to.: All the channels available will be found and stored on your TV.
• No, I don't need to.: My set-top box provides all the channels that are available, so I don't
need to search for channels.
Select the channel source to memorise. When setting the aerial source to Cable, a step appears
allowing you to assign numerical values (channel frequencies) to the channels. For more information,
refer to Auto Tuning (Channel Menu → Memorizing Channels) in the e-Manual.
✎ When Air or Cable is selected first: After all Air or Cable channels are stored, the step for
storing Satellite channels is displayed.
✎
When Satellite is selected first: After all Satellite channels are stored, the step for storing
Air or Cable channels is displayed.
✎
Select Stop at any time to interrupt the memorization process.
• Auto: Set the current time automatically.
• Manual: Allows you to manually set the current date and time.
✎
You can turn the Voice and motion control function On or Off. Select Off or On, and then
select Next. For more detailed information, refer to "SMART Interaction" (p.14)
Select Close to finish.
✎ The completed settings are displayed.
(on).
English - 12