Samsung UE32EH4000W E-Manual page 3

✎
Please make sure the following items are included with your TV. If any items are missing, contact your dealer.
✎
The items' colours and shapes may vary depending on the models.
✎
Cables not included in the package contents can be purchased separately.
Remote Control & Batteries (AAA x 2)
y
Warranty Card / Safety Guide (Not available in some locations)
y
Holder-Wire Stand
y
✎
An administration fee may be charged if either
(a) an engineer is called out at your request and there is no defect in the product
(i.e. where you have failed to read this user manual)
(b) you bring the unit to a repair centre and there is no defect in the product
(i.e. where you have failed to read this user manual)
✎
The amount of such administration charge will be advised to you before any work or home visit is carried out.
TV Controller is a multi directional button that helps navigate
without remote control.
✎
Some functions which require a PIN code may not be
available.
✎
The product colour and shape may vary depending on
the model.
✎
Exits the menu when pressing the controller more than 1
second.
✎
When selecting the function by moving the controller to
the up/down/left/right directions, be sure not to press
the controller. If you press it first, you cannot operate it to
move the up/down/left/right directions.
Power on
Adjusting the volume
Selecting a channel
Using the function menu
Using the Menu
Selecting the Source
Selecting the Contents Home
Power Off
Standby mode
Do not leave your TV in standby mode for long periods of time (when you are away on a holiday, for example). A small amount of
electric power is still consumed even when the power button is turned off. It is best to unplug the power cord.
Accessories
Using the TV's Controller (Panel Key)
Remote control sensor
Turns the TV on by pressing the controller in standby mode.
Adjusts the volume by moving the controller from side to side when the power is on.
Selects a channel by moving the controller up and down when the power is on.
Press the controller when the power is on, then the function menu screen appears. If you
press it again, the function menu screen disappears.
Selects the MENU(m) by moving the controller in the function menu screen. The OSD(On
Screen Display) of your TV's feature appears.
Selects the Source( ) by moving the controller in the function menu screen. The Source
list screen appears.
Selects the Contents Home(
The Contents Home main screen appears.
Selects the Power Off(P) to turn the TV off by moving the controller in the function menu
screen.
English - 3
Power Cord
y
Owner's Instructions
y
Assembling the Holder-Wire stand
Function menu
Left
Return
TV Controller
) by moving the controller in the function menu screen.
Down (Front)
Right
Up (Rear)