Haier HMS1060TVE User Manual
Haier HMS1060TVE User Manual

Haier HMS1060TVE User Manual

Automatic drum washing machine

Advertisement

Quick Links

AUTOMATIC DRUM WASHING MACHINE
USER MANUAL
HMS1060TVE
HMS1060TVEME

Advertisement

Table of Contents
loading

Summary of Contents for Haier HMS1060TVE

  • Page 1 AUTOMATIC DRUM WASHING MACHINE USER MANUAL HMS1060TVE HMS1060TVEME...
  • Page 2: Table Of Contents

    03 - 09 10 - 15 16- 20 TABLE OF CONTENTS BEFORE USE USING THE APPLIANCE MAINTENANCE COMPONENTS ....... 03 CLEANING & CARE ......16 > PROGRAM SELECTION ..... 10 > > PREPARATION ........ 04 DISPLAY CODES ......18 > CONSUMPTION AND TECHNICAL DATA ..
  • Page 3: Components

    BEFORE USE COMPONENTS THANKS FOR PURCHASING A HAIER PRODUCT Please read these instructions carefully before using this appliance. The instructions contain important information which will help you get the best out of the appliance and ensure safe and proper installation, use and maintenance.
  • Page 4: Before Use

    BEFORE USE PREPARATION PREPARING THE MACHINE Remove all the packing materials to prevent unsteadiness, including the polystyrene base. Upon opening the package, water drops may be seen on the plastic bag and the porthole. This is normal phenomenon resulting from water tests in the factory. DESCRIPTION This diagram may be slightly different from the layout of the washing machine you have just purchased due to technical improvements.
  • Page 5: Safety Instructions

    BEFORE USE SAFETY INSTRUCTIONS BEFORE SWITCHING THE APPLIANCE ON FOR THE FIRST TIME DO ... DO NOT ..Make sure that the transport bolt are removed..Touch or use the appliance when barefoot or with wet ... Use a separate earthed socket for the power supply. or damp hands or feet.
  • Page 6: Installation

    BEFORE USE INSTALLATION DISMANTLE THE TRANSPORTATION BOLTS The transportation bolts are designed for clamping anti-vibration components inside of the washing machine during the transportation process. Remove the back cover. Remove the three bolts on the rear side and take out the synthetic stabilisers from within the machine.
  • Page 7 BEFORE USE INLET HOSE 1. Connect the nut on the inlet hose to the connector on the water valve. 2. Apply inlet hose to a water tap with cold, fresh water. Note: Use the hose-set supplied with the appliance. Old hose-sets should not be reused.
  • Page 8: Control Panel

    BEFORE USE CONTROL PANEL Prewash Cotton Synthetic Wool Cashmere Silk Quick Wash Rinse Spin Drain Program knob Delay Button Power Switch Detergent distribution drawer Start/Pause Button Display Spinning Speed Setting Button E+F: Combination for keyboard lock Washing temperature button OPERATIONAL FUNCTIONS ¬...
  • Page 9 BEFORE USE ¬Delay Button Touch this button lightly, the washing machine will start operation after a period of time and the corresponding indicator will go on. The range is 0.5-24 hours; each touch of this button increases a half hour. After the button is set, press the Start/Pause button to start countdown of the set time (the time is displayed on the screen until the program ends).
  • Page 10: Program Selection

    USING THE APPLIANCE PROGRAM SELECTION PROGRAM MODES 1 Detergent compartment for prewash mode 2 Detergent compartment 3 Compartment for softener and other additives Temperature Preset spin speed Program Maximum Preset Recommended Laundry ¬ Prewash - - to 90 °C 40 °C Heavy soiling 1000 rpm ¬...
  • Page 11: Consumption And Technical Data

    3 kg 0.44 kWh 40°C 0:53 h EN 60456 test program / Energy label program with Cotton 60°C and 1000rpm spin speed. TECHNICAL DATA HMS1060TVE HMS1060TVEME Power source 220 - 240V~/50Hz Max. working current (A) Water pressure (MPa) 0.03≤P ≤1...
  • Page 12: Using The Appliance

    USING THE APPLIANCE WASHING METHODS PLEASE NOTE This washing machine is for domestic use only. If the machine is use for commercial purpose the guarantee will not be valid anymore.Do not use it for purposes other than that for which it was designed. Follow the instructions given on the label of each garment and wash only machine-washable garments.
  • Page 13 USING THE APPLIANCE LOADING THE MACHINE Open the washer door, put in the laundry piece by piece. Close the door tightly. ¬ When fi rst using the washing machine, let it run unloaded for one program to prevent the laundry from being tainted by oil or dirty water from the washing machine.
  • Page 14 USING THE APPLIANCE SETTING WASHING TEMPERATURE Press and hold down the temperature button until the desired temperature is selected or the symbol "--" for no water heating. SETTING SPIN SPEED Press and hold down the speed button until the desired speed is selected or the symbol "0" is selected for no spin.
  • Page 15 USING THE APPLIANCE CARE CHART Resistant material Bleachable in cold water Don't dry clean Delicate fabric Do not bleach Dry fl at Washable at 95 °C Iron at 200 °C Hung to dry Washable at 60 °C Iron at 150 °C Dry on clothes hanger Washable at 40 °C Iron at 100 °C...
  • Page 16: Maintenance

    MAINTENANCE CLEANING & CARE AFTER WASHING Turn off the water supply and pull out electricity plug after each wash. Open the washer door to prevent formation of moisture and odours. If the washing machine is left idle for a long period, drain the water in the machine and replace the drain hose.
  • Page 17 MAINTENANCE WATER INLET VALVE AND INLET VALVE FILTER To prevent blockage to the water supply by ingress of foreign substances, clean the water inlet valve and inlet valve fi lter regularly. MOVING THE MACHINE If the machine is to be moved to a distant location, replace the transportation bolts removed before installation to prevent damage as shown below.
  • Page 18: Display Codes

    MAINTENANCE DISPLAY CODES DISPLAY CODES AND SPECIAL FUNCTIONS CODES CAUSES SOLUTIONS Err1 ¬ Door is not properly shut. _ Shut the door properly. Err2 ¬ Drainage error, water not emptied within 4 _ Clean the fi lter and check the drain hose for blockage. If error minutes.
  • Page 19: Troubleshooting

    MAINTENANCE TROUBLESHOOTING TROUBLESHOOTING The following circumstances do not constitute problems. Do not contact the Service Center until the problem has been confi rmed. PROBLEM CAUSES SOLUTIONS Washing machine fails to ¬ Poor connection to the power supply. _ Check connection to the power supply. operate.
  • Page 20 MAINTENANCE...

This manual is also suitable for:

Hms1060tveme

Table of Contents