Belkin F8Z082-BLK - TuneTalk - Digital Player Voice Recording Unit User Manual page 4

Using the TuneTalk Stereo
Mini-B Auto-Gain
USB Port Switch
3.5mm Auxiliary Stereo Input
The auxiliary input can be used with any line-level input, such as amplified microphones or other
audio devices. The TuneTalk Stereo also provides three-volt (3V) "plug-in power" for use with an
external microphone. When the TuneTalk Stereo senses that an auxiliary source is connected, the
on-board microphones are automatically disabled.
Auto-Gain Switch
The TuneTalk Stereo includes a two-level auto-gain switch intended to optimize the quality of
your recorded audio. The OFF setting is activated by moving the switch to the left of the setting
bar. The OFF setting is for line-level input sources, such as amplified microphones, other audio
devices, or microphone recordings in very loud environments. The ON setting is activated by
moving the switch to the right of the setting bar, and is suitable for most microphone recordings.
Source
Auto-gain off, low amplification. Useful for
Internal
Useful for recording in very loud situations, or
External
when the external source is a line-level audio
source, like another MP3 player or a TV set.
NOTE: Recording quality is dependent on the type of microphone used.
Using the TuneTalk Stereo | 03
3.5mm Auxiliary
Stereo Input
Off
recording in loud situations.
Auto-gain off, no amplification.
Auto-Gain Switch
Auto-gain on, with sufficient pre-gain for
Auto-gain on, with sufficient pre-gain for
On
normal microphone recordings.
normal microphone recordings.