Belkin F8Z082-BLK - TuneTalk - Digital Player Voice Recording Unit User Manual page 3

Using the TuneTalk Stereo
To select the recording quality:
From the iPod menu, select "Extras > Voice Memos > Quality". Pressing the "Select" button will
toggle between Low (22.05kHz, mono) or High (44.1kHz, stereo).
To record:
1. Connect the TuneTalk to the bottom of the iPod. The "Record" function will launch when
you do this. With the "Record" option highlighted, press "Play/Pause" or press the "Select"
button to begin recording. To pause recording, press "Play/Pause" again or highlight
"Pause" and then press the "Select" button on the iPod.
2. During recording, there are two options: "Pause" and "Stop and Save". To end a recording,
either press the "Menu" button or highlight the "Stop and Save" option, and then press the
"Select" button. This saves your recording and lists it by date and time recorded.
NOTE: After stopping a recording, the recording LED remains on until the recording is saved to
the iPod.
3. To begin another recording, go to the top of the "Voice Memos" menu and select "Record
Now"; or, from the iPod menu, select "Extras > Voice Memos > Record Now". Or simply press
the "Quick Memo" button on the TuneTalk Stereo.
NOTE: For personal memos or notes, hold the iPod with the TuneTalk Stereo attached 6 to 18
inches from your mouth and speak in a normal tone. Holding the device too close or speaking
too loudly may degrade the quality of your recording.
Using the TuneTalk Stereo | 02