Download Print this page

EAW KF911 Specifications

Ppst downfill hf module

Advertisement

Quick Links

FEATURES
• Downfill HF Phased PointSource Technology™ module
• 2x 2-in HF on separate SimplePhase™ horns
• PPST™ systems build arrays for the largest spaces
• Pre-configured DSP defines coverage by integrating
cells and modules to fit its application
• P (install) or F (portable) versions available
DESCRIPTION
A dedicated PPST™ downfill high frequency system in a trape-
zoidal enclosure. Includes 2x 2-in exit compression drivers on
SimplePhase™ horns.
APPLICATION
The KF911 PPST™ downfill HF module is engineered for use in
KF900 Series arrays. It provides HF coverage from -15° to -
60° below the array. KF900 Series modules can only be used
in arrays and must be integrated with complex PPST™ pro-
cessing. Six year warranty.
Applications include:
Stadiums
Concert Tours
PERFORMANCE
Frequency Response (1 Watt @ 1m)
±3 dB
-10 dB
Axial Sensitivity (dB SPL, 1 Watt @ 1m)
HF
Impedance (Ohm)
HF
Power Handling, AES Standard (Watts)
HF
Recommended Amplifier Power (Watts)
HF
Calculated Maximum Output (dB SPL @ 1m)
HF Peak
HF Long Term
Nominal Coverage Angle, -6 dB Points (degrees)
Horizontal
Vertical
Recommended High-Pass Frequency
24 dB/Octave
Recommended Complementary Systems
Sub
LF
Mid/High
One Main Street, Whitinsville, MA 01588
EAW products are continually improved. All specifications are therefore subject to change without notice.
500 Hz to 14 kHz
400 Hz to 16 kHz
113
2x 8
2x 200
2x 400
145.0
139.0
30
Beam profile adjustable via
PPST™ processing
1250 Hz, 500 Hz minimum
KF940
KF930
KF920, KF910
508 234 6158
Toll Free 800 992 5013
SPECIFICATIONS KF911
Prototype shown with temporary hardware
PHYSICAL
HF Subsystem 2X 2-in exit compression drivers
Configuration Dedicated HF, downfill
Powering Active processing
Controls (switches, knobs) None
Cabinet Type (shape) Trapezoidal
Enclosure Materials Baltic birch plywood
Finish Black catalyzed polyurethane
Connectors One each male and female AP6
Suspension Hardware (16) 3/8"-16 threaded mounting
Grille Vinyl coated perforated steel,
Dimensions
Height 46.00
Width (front) 30.00
Width (rear) 8.56
Depth 40.00
Trapezoid Angle 15° per Side
Weights
Net Weight 280
Shipping Weight 288
FAX 508 234 8251
KF911/888057(B)/2 pp
on 30° (H) SimplePhase Horns
points (4 each top, bottom and
sides)
foam backed
inches
millimeters
1168
762
217
1016
pounds
kilograms
127.4
131.0
info@eaw.com
www.eaw.com
5/1/00
Printed in USA

Advertisement

loading

Summary of Contents for EAW KF911

  • Page 1 KF940 KF930 Mid/High KF920, KF910 One Main Street, Whitinsville, MA 01588 EAW products are continually improved. All specifications are therefore subject to change without notice. PHYSICAL Controls (switches, knobs) None Cabinet Type (shape) Trapezoidal Suspension Hardware (16) 3/8”-16 threaded mounting...
  • Page 2: Dimensional Drawing

    HF B PIN 6 One Main Street, Whitinsville, MA 01588 EAW products are continually improved. All specifications are therefore subject to change without notice. A & E SPECIFICATIONS The HF module shall incorporate 2x horn-loaded 2-in exit compression driver HF transducers. The module shall have a nominal horizontal coverage pattern of 30°.