Information Codes - Samsung DMT300RFB User Manual

InformatIon codES

Information codes are displayed to help you better understand what is occurring with your dishwasher.
If occured the below codes, you should select the Cancle&Drain option and follow the below instruction.
COde SymbOl meANING
For any codes not listed above, call 1-800-SAMSUNG(726-7864)
DMR78-00036A(XAA).indb 25
Thermistor error
Heater error
Heater error
Low water level error
Half load function error
Water supply error
The temperature of the supplied
water is too high
Drain error
Water level error (over-level)
Leakage
Key pressed
SOlUTION
Functional error. Insert detergent without loading
dishes, and run a cycle.
If the problem continues, disconnect the circuit
breaker and contact a service center.
Check whether the water supply line is
connected correctly.
Check whether the water supply valve is closed,
the water supply is suspended or the water
inlet valve or line is frozen or clogged by foreign
particles.
If the problem continues, disconnect the circuit
breaker and contact a service center.
Check the temperature of the supplied water. If
it is higher than 176 ˚F (80 ˚C), a functional error
may occur with the dishwasher.
Check whether the drain hose is clogged or
folded. If the problem continues, disconnect the
circuit breaker and contact a service center.
Functional error. Disconnect the circuit breaker
and contact a service center.
Functional error. Close the water supply valve
and disconnect the circuit breaker and contact a
service center.
Functional error. Turn off the dishwasher and Use
a soft damp cloth on the control panel. (Refer to
the cleaning section.)
If the problem continues, disconnect the circuit
breaker and contact a service center.
troubleshooting _25
2009-09-11 7:19:19