Dial Cgcles - GE HDA3500NCC - Dishwasher w/ 5 Wash Cycles Owner's Manual

Operation of models with cycle dial ge.com
i.mtStart
o
Off 0 :_ Li_h_ W_s_q
Rinse Only
For rinsing partial loads that will be washed late_ Do not use detergent.
_ Make sure HEATED DRYis not selected. Slowly turn the Dial to RINSE ONLX
Be sure the door is unlatched. Latch the door to start the cycle.
c_fo L_bwgs,
*°'o_i . .........
Ha_ted r_On)
U lemed Dr u C'_I
Plate Warmer or Drying
Forwarming clean dishes and serving plates.This cycle will take approximately 39 minutes.
Load clean dishware to be warmed. _ Slowly turn the Dial to PLATEWARMERor
Select HEATEDDRY ON DRYING.
Be sure the door is unlatched. _ Latch the door to start the cycle.
o •
StartOei_ 1,; %
o! ID [ \ \ /_ Light,Cash
Hot Start or Hot Prestart Option
Preheatswash wateE
Select the HOTSTART or HOTPRESTART
........... cyc e and any other option on the push
button pad,
_ii Be sure the door is unlatched.
Slowly turn the Dial to HOTSTARTor
.................. HOT PRESTART.
atch the doorto start the cycle.
OI 0 Light Wash
Short Wash or Light Wash or Water Saver
For quickly washing loads of everyday dishes with light to medium soils that have not dried on.
L Be sure the door is unlatched. _ Latch the door to start the cycle.
Slowly turn the Dial to SHORTWASH,
................. LIGHTWASH or WATER SAVER.
s _rt_ei_ ,1, _ - ',
Start Delay (on some models)
The START DELAYwill allow you to delay the start time of any cycle automatically up to 6 hours.
Be sure the door is unlatched. _ Slowly turn the Dial to the desiredtime.
................... The CYCLE ON light will come on.
Select the wash cycle and option you want. Latch the door to start the cycle.
Start (Models with a Dial)
Slowly turn the Dial to the START or ON position, or the selected cycle. Don't turn it past the START,
ON or cycle position; you could accidentally miss a prewash.
There is a time delay between start-up and water fill so you will not hear any wash action right
away.
_;_Latch the door to begin the cycle.