Advertisement
Quick Links
Installation/Instructions/DSA Series
CM-1 CobraNet Interface Card
1. Description:
WARNING: Prior to installing the CM-1 ensure that the AC mains to the loudspeaker is disconnected or off. Installation with
the AC mains on can permanently damage either the CM-1 or the electronics in the loudspeaker.
2. Usage
DANGER: When unpacking, handling, and installing the CM-1 card, ensure
there is no static build-up. A static discharge from your body, work surface, or
loudspeaker to the CM-1 card can permanently damage the CM-1's electronics.
3. Installation:
IMPORTANT:
NOTE:
Thank you for purchasing EAW products
1 Main Street • Whitinsville, MA 01588 • Phone (800) 992-5013 • FAX (508) 234-8251
These instructions apply to all DSA Series loudspeakers.
CM-1 COBRANET INTERFACE CARD ASSEMBLY
4X FLAT HEAD SCREWS
SIGNAL
END
RD0087 (A)
Advertisement
