Sign in today to find solutions:

Forgot your password?

Don't have an account? Sign up

EAW Cinema Electronic Crossover CX300 Technical Specifications

Eaw cinema electronic crossover specification sheet.

Technical Specifications CX300
PRODUCT INFORMATION
The CX300 is a dedicated cinema electronic crossover, with a
specific configuration available for each EAW cinema screen
channel system. It is a cost-effective, single rack-space,
analog electronic crossover designed for use in biamplified or
triamplified applications. The unit is a three-channel design,
so a single CX300 will provide crossover, equalization, and
time-offset functions for a Left, Center, and Right cinema
system. This removes the burden of "setting up" from the
end-user and assures optimum system performance.
CLOSE COUPLED ELECTRONIC PROCESSING™
The concept of Close Coupled Electronic Processing™ (CCEP™)
is central to the EAW design process. EAW engineers integrate
electronic signal processing into the total loudspeaker
system, but we recognize that electronics can only improve
performance after all other electro-mechanical factors have
been optimized. The CX300 processor incorporates functions
such as complex asymmetrical crossover filters, phase
compensation, and parametric equalization. All of these
parameters are configured for a particular loudspeaker system
in an iterative design process using EAW's rapid data acquisi-
tion facility and in-house multi-platform computer network.
CONFIGURATIONS
Each CX300 processor is configured (Close Coupled™) to a
particular EAW cinema screen channel loudspeaker system.
Please refer to the information below to find the appropriate
CX300 processor for your application. If you have any
questions please contact an authorized EAW sales agent, or
the factory itself, to be certain that you order the correctly
configured processor for your cinema system.
Model
Speaker system
CX300-CB152
CB152
CX300-CB153
CB153
CX300-CB259
CB259
CX300-CB423MX
CB423MX
CX300-CB523
CB523
CX300-CB523MX
CB523MX
CX300-MC4953B
MC4953B
CX300-MC4973B
MC4973B
CX300-CB423M
CB423M
CX300-CB523M
CB523M
CX300-MC4953
MC4953
CX300-MC4973
MC4973
One Main Street, Whitinsville, MA 01588 • (508) 234-6158 • FAX (508) 234-8251 • Email info@eaw.com • Web http://www.eaw.com
EAW products are continually improved. All specifications are therefore subject to change without notice. • PUB# CX300/05/23/00 • Printed In USA
Biamp/Triamp
Biamp
Biamp
Biamp
Biamp
Biamp
Biamp
Biamp
Biamp
Triamp
Triamp
Triamp
Triamp
CINEMA SERIES
SPECIFICATIONS
Inputs
Three; active balanced
Input Impedance
> 20k Ohms
Max. Input Level
+22dBu
Outputs
Nine; active balanced
Output Source Impedance
200 Ohms
Output Min. Load
600 Ohms
Output Max. Level
+26dBu into 600 Ohm load
Frequency Resp.
+/- 0.5dB 20Hz - 20kHz
Noise
< -90dBu, 20Hz - 20kHz unwtd
Dynamic Range
110dB
Total Harmonic Distortion
< 0.003% 20Hz - 20kHz, 0dBu
Gain
+/- 12dB from unity setting
Gain at Unity Setting
0dB unbalanced out, 6dB balanced out
within passband
Input Connectors
Phoenix-compatible plug blocks
Output Connectors
Phoenix-compatible plug blocks
Power Connector
3 pin IEC
Power
95-130 VAC, 190-260 VAC; 50-60Hz
Power Consumption
< 15 watts
Agency Listing
UL listed, CE certified
Net Weight
8.5 pounds (3.9kg)
Shipping Weight
10 pounds (4.5kg)
Dimensions
1.75 (1U) X 19.00 X 8.16 inches
(44 X 483 X 207mm)

Comments to this Manuals

Symbols: 0

Latest comments:

×

Select the desired size and copy embed code

Copy your embed code and put on your site: