Items To Prepare - Samsung CLP-360 User Manual

Clp-360 colour laser printer
Hide thumbs Also See for CLP-360:
Table of Contents

Advertisement

Wireless network setup
Before entering the IP address for the machine, you must know the
computer's network configuration information. If the computer's network
configuration is set to DHCP, the wireless network setting should also be
DHCP. Likewise, if the computer's network configuration is set to Static, the
wireless network setting should also be Static.
If your computer is set to DHCP and you want to use the Static wireless
network setting, you must contact the network administrator to get the
static IP address.
For the DHCP method
If the IP address assignment method is DHCP, check if DHCP is shown in
the Wireless Network Setting Confirm window. If it shows Static, click
Change TCP/IP to change the assignment method to Receive IP
address automatically (DHCP).
For the Static method
If the IP address assignment method is Static, check if Static is shown in
the Wireless Network Setting Confirm window. If it shows DHCP, click
Change TCP/IP to enter the IP address and other network configuration
values for the machine.
For example,
If the computer's network information is as shown follows:
- IP address: 169.254.133.42
- Subnet Mask: 255.255.0.0
Then, the machine's network information should be as below:
- IP address: 169.254.133.43
- Subnet Mask: 255.255.0.0 (Use the computer's subnet mask.)
- Gateway: 169.254.133.1
7
The Wireless Network Setting Complete window appears. Click Next.
8
When the wireless network settings are completed, disconnect the USB
cable between the computer and machine. Click Next.
9
Select software to be installed.
10
After selecting the components, you can also change the printer driver
name, set the machine to be shared on the network, set the machine as
the default machine. Click Next.
11
If you want to register your machine with the Samusng web site and
receive useful information, click On-line Registration. If not, click
Finish.
16
Setup using Mac

Items to prepare

Access point
Network-connected computer
Software CD that was provided with your machine
A machine installed with a wireless network interface
USB cable
2. Using a network-connected machine
32

Advertisement

Table of Contents
loading

This manual is also suitable for:

Clp-365wClp-365Clp-36 seriesClp-36xw series

Table of Contents