1. Manuals
  2. Brands
  3. Samsung Manuals
  4. Monitor
  5. SyncMaster S24A650D
  6. User manual

Samsung SyncMaster S24A650D User Manual

24" s24a650d series 6 professional monitor
Hide thumbs Also See for SyncMaster S24A650D:
Table of Contents

Advertisement

Quick Links

User Manual

SyncMaster
S22A650D
S24A650D
S27A650D
S24A850DW
The color and the appearance may differ depending on
the product, and the specifications are subject to
change without prior notice to improve the performance.
BN46-00081A-06

Advertisement

Table of Contents
loading

Related Manuals for Samsung SyncMaster S24A650D

Summary of Contents for Samsung SyncMaster S24A650D

  • Page 1: User Manual

    User Manual SyncMaster S22A650D S24A650D S27A650D S24A850DW The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance. BN46-00081A-06...

  • Page 2: Before Using The Product

    © 2011 Samsung Electronics Samsung Electronics owns the copyright for this manual. Use or reproduction of this manual in parts or entirety without the authorization of Samsung Electronics is prohibited. The SAMSUNG and SyncMaster logos are registered trademarks of Samsung Electronics.
  • Page 3 Before Using the Product Activities marked by this symbol are prohibited. Instructions marked by this symbol must be followed. Before Using the Product...
  • Page 4 Before Using the Product Cleaning Cleaning Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. Take the following steps when cleaning. 1. Power off the monitor and computer. 2. Disconnect the power cord from the monitor. Hold the power cable by the plug and do not touch the cable with wet hands.

  • Page 5: Securing The Installation Space

    High-glossy models can develop white stains on the surface if an ultrasonic wave humidifier is used nearby. Be sure to contact Samsung Customer Service Center (page 86) if the inside of the monitor needs cleaning. (service fee will be charged).
  • Page 6 Before Using the Product Warning Do not use a damaged power cord or plug, or a loose power socket. An electric shock or fire may result.  Do not plug many products into the same power socket. Otherwise, the socket may overheat and cause a fire. ...

  • Page 7: Installation

    The product may become damaged by an electric shock.  Do not use the power cord for products other than authorized products supplied by Samsung. An electric shock or fire may result.  Keep the power socket where the power cord is connected unobstructed.
  • Page 8 Before Using the Product Do not install the product on an unstable or vibrating surface (insecure shelf, sloped surface, etc.). The product may fall and break or cause a personal injury.  Using the product in an area with excess vibration may damage the product ...

  • Page 9: Operation

    Be sure to consult Samsung Customer Service Center (page 86) before  installation if you want to install the product at such a place.
  • Page 10 Before Using the Product During a lightning or thunderstorm, power off the product and remove the power cable. An electric shock or fire may result.  Do not drop objects on the product or apply impact. An electric shock or fire may result. ...
  • Page 11 (paper, match, etc.) into the vent or ports of the product. If water or any foreign substance enters the product, be sure to power off the  product, remove the power cord, and contact Samsung Customer Service Center (page 86). Product failure, an electric shock or fire may result.
  • Page 12 Before Using the Product Do not let water enter the DC power device or get the device wet. An electric shock or fire may result.  Avoid using the product outdoors where it can be exposed to rain or snow. ...

  • Page 13: Correct Posture To Use The Product

    Before Using the Product Exercise caution when adjusting the product angle or stand height. Otherwise, children's fingers or hands may become stuck and injured.  Tilting the product excessively may cause it to fall and result in personal  injury. Do not place heavy objects on the product.

  • Page 14: Table Of Contents

    Table Of Contents BEFORE USING THE Copyright PRODUCT Icons used in this manual Symbols for safety precautions Cleaning Cleaning Securing the Installation Space Precautions for storage Safety Precautions Electricity and Safety Installation Operation Correct posture to use the product PREPARATIONS Checking the Contents Removing the Packaging Checking the Components...
  • Page 15 Connecting the Product to a PC as a USB HUB (for the SA850 Model Only) Connecting a PC to the Product Utilizing the Product as a USB HUB Connecting the Power SCREEN SETUP MAGIC SAMSUNG MAGIC Bright SAMSUNG MAGIC Color Brightness Configuring Brightness Contrast Configuring Contrast Sharpness...
  • Page 16 Table Of Contents Green Configuring Green Blue Configuring Blue Color Tone Configuring the Color Tone Settings Gamma Configuring Gamma RESIZING OR Image Size RELOCATING THE Changing the Picture Size SCREEN H-Position & V-Position Configuring H-Position or V-Position Menu H-Position & Menu V-Position Configuring Menu H-Position or Menu V- Position SETUP AND RESET...
  • Page 17 Initializing Settings (Reset) INFORMATION MENU AND INFORMATION OTHERS Displaying INFORMATION Configuring Brightness in the Startup Screen TROUBLESHOOTING Requirements Before Contacting Samsung Customer Service Center GUIDE Testing the Product Checking the Resolution and Frequency Check the followings. Q & A SPECIFICATIONS General PowerSaver...
  • Page 18 Table Of Contents Correct Disposal of This Product (Waste Electrical & Electronic Equipment) Terminology INDEX Table Of Contents...

  • Page 19: Preparations

    Preparations Checking the Contents 1.1.1 Removing the Packaging Open the packaging box. Be careful not to damage the product when you open the packaging with a sharp instrument. Remove the Styrofoam from the product. Check the components and remove the Styrofoam and plastic bag. The appearance of actual components may differ from the image shown.

  • Page 20: Checking The Components

    Preparations 1.1.2 Checking the Components Contact the dealer from whom you purchased the product if any item is missing.  The appearance of the components and items sold separately may differ from the image shown.  Components Quick Setup Guide Warranty Card User Manual (Not available in some...

  • Page 21: Parts

    Preparations Parts 1.2.1 Frontal Buttons The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. SA650 SA850 Icons Description Open or close the onscreen display (OSD) menu, or return to the last ...
  • Page 22 Preparations Icons Description Configure Customized Key and press [ ]. The following options will be enabled. MAGIC Image Size To configure Customized Key, go to SETUP&RESET Customized Key and select the mode you want. Move to the upper or lower menu or adjust the value for an option on the OSD menu.

  • Page 23: Reverse Side

    Preparations 1.2.2 Reverse Side The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. SA650 SA850 1 Preparations...
  • Page 24 Preparations Port Description Connects to the DC power adapter. Connects to a PC via a DP cable. Connects to a PC via a DVI cable. Connects to a PC using the D-SUB cable. Connects to the stereo cable Connects to an audio output device such as headphones. Connect to a USB device.

  • Page 25: Installation

    Preparations Installation 1.3.1 Attaching the Stand Place a protective cloth or Insert the stand base into the Do not remove the fixing pin until cushion on a flat surface. Next, stand in the direction of the you are finished attaching the place the product with the face arrow.

  • Page 26: Adjusting The Product Tilt And Height

    Preparations 1.3.2 Adjusting the Product Tilt and Height The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. To adjust the height, remove the fixing pin.  The monitor tilt and height can be adjusted. ...

  • Page 27: Installing A Wall-Mount Kit Or Desktop Stand

    Preparations 1.3.4 Installing a Wall-mount Kit or Desktop Stand Before Installation Power the product off and remove the power cable from the power socket. Place a protective cloth or Unfasten the screw from the Lift and detach the stand. cushion on a flat surface. Next, back of the product.

  • Page 28: Anti-Theft Lock

    Samsung shall not be held liable for any damage or injury caused by using improper screws or attaching the wall-mount kit or desktop stand using excessive force. Samsung shall not be held liable for any product damage or personal injury caused by using a wall- ...

  • Page 29: Magicrotation Auto

    Preparations "MagicRotation Auto" The "MagicRotation Auto" function detects the rotation of monitors that are fitted with a rotation sensor and rotates the Windows screen accordingly. [Software Installation] Insert the user manual CD provided with the product into the CD-ROM drive. Follow the instructions given on the screen to proceed with installation.

  • Page 30: Connecting And Usinga Source Device

    Connecting and Using a Source Device Before Connecting 2.1.1 Pre-connection Checkpoints Before connecting a source device, read the user manual provided with it.  The number and locations of ports on source devices may differ from device to device. Do not connect the power cable until all connections are completed. ...

  • Page 31: Connecting And Using A Pc

    Connecting and Using a Source Device Connecting and Using a PC 2.2.1 Connecting to a PC Select a connection method suitable for your PC.  Connecting parts may differ in different products. Connection using the D-SUB cable (analogue type) RGB IN Connect the D-SUB cable to the [RGB IN] port on the back of the product and the RGB port on the Connect the DC power adapter to the product and a power socket, and turn on the power switch on the PC.
  • Page 32 Connecting and Using a Source Device Audio is not available if the PC and product are connected via the [DVI] port.  Refer to "2.3 Connecting Headphones (for the SA850 Model Only)" for details on how to enable  sound. Connection Using the HDMI-DVI Cable DVI IN Connect the DVI cable to the [DVI IN] port on the back of the product and the HDMI port on the PC.

  • Page 33: Driver Installation

    An installation driver is contained on the CD supplied with the product.  If the file provided is faulty, visit the Samsung homepage (http://www.samsung.com/sec) and  download the file. Insert the user manual CD provided with the product into the CD-ROM drive.

  • Page 34: Setting Optimum Resolution

    Connecting and Using a Source Device 2.2.3 Setting Optimum Resolution An information message about setting optimum resolution will appear if you power on the product for the first time after purchase. Select a language and change the resolution to the optimum value. The optimal resolution for this monitor is as follows: The optimal resolution for this monitor is as follows: 1920 x 1080 60Hz...

  • Page 35: Changing The Resolution Using A Pc

    Connecting and Using a Source Device 2.2.4 Changing the Resolution Using a PC Adjust the resolution and refresh rate in Control Panel on your PC to obtain optimum picture  quality. The picture quality of TFT-LCDs may degrade if the optimum resolution is not selected. ...
  • Page 36 Connecting and Using a Source Device Changing the Resolution on Windows Vista Go to Control Panel Personalization Display Settings and change the resolution. 2 Connecting and Using a Source Device...
  • Page 37 Connecting and Using a Source Device Changing the Resolution on Windows 7 Go to Control Panel Display Screen Resolution and change the resolution. 2 Connecting and Using a Source Device...

  • Page 38: Connecting Headphones (For The Sa850 Model Only)

    Connecting and Using a Source Device Connecting Headphones (for the SA850 Model Only) AUDIO IN Connect the stereo cable to the [AUDIO IN] port on the back of the product and the AUDIO OUT port on the PC. If the stereo cable is connected, the Volume (VOL) can be adjusted using the [ ] buttons on the...

  • Page 39: Connecting The Product To A Pc As A Usb Hub (For The Sa850 Model Only)

    Connecting and Using a Source Device Connecting the Product to a PC as a USB HUB (for the SA850 Model Only) 2.4.1 Connecting a PC to the Product The product can function as a HUB by connecting to a PC via a USB cable. You can connect a source device directly to the product and control the device from the product, without having to connect the device to the PC.

  • Page 40: Connecting The Power

    Connecting and Using a Source Device Connecting the Power Put the DC power adapter in the groove, with the switch facing upward. - Push the adapter until you hear a “click.” Connect the power cable to the DC power adapter. Next, connect the DC power adapter to the product.

  • Page 41: Screen Setup

    Configure the screen settings such as brightness and color tone. MAGIC This feature provides the viewing angle, brightness, and tint to suit your preferences. 3.1.1 SAMSUNG MAGIC Bright This menu provides an optimum picture quality suitable for the environment where the product will be used.

  • Page 42: Samsung Magic Color

    Screen Setup 3.1.2 SAMSUNG MAGIC Color Color is a new picture-quality improvement technology developed independently by Samsung, which delivers vivid natural colors without picture quality degradation. This menu is not available when Bright is in Cinema Dynamic Contrast mode. Configuring...

  • Page 43: Brightness

    Screen Setup Brightness Adjust the general brightness of the picture. (Range: 0~100) A higher value will make the picture appear brighter. This menu is not available when Bright is set to Dynamic Contrast mode.  This menu is not available when Eco Light Sensor Eco Saving is set to On.

  • Page 44: Contrast

    Screen Setup Contrast Adjust the contrast between the objects and background. (Range: 0~100) A higher value will increase the contrast to make the object appear clearer. This menu is not available when Bright is in Cinema Dynamic Contrast mode.  This menu is not available when Color is in...

  • Page 45: Sharpness

    Screen Setup Sharpness Make the outline of objects more clear or blurry. (Range: 0~100) A higher value will make the outline of objects clearer. This menu is not available when Bright is in Cinema Dynamic Contrast mode.  This menu is not available when Color is in Full...

  • Page 46: Coarse

    Screen Setup Coarse Adjust the screen frequency. Only available in Analog mode. 3.5.1 Adjusting Coarse Press [ ] on the product. MENU Press [ ] to move to PICTURE and press [ ] on the product. Press [ ] to move to Coarse and press [ ] on the product.

  • Page 47: Fine

    Screen Setup Fine Fine-adjust the screen to obtain a vivid picture. Only available in Analog mode. 3.6.1 Adjusting Fine Press [ ] on the product. MENU Press [ ] to move to PICTURE and press [ ] on the product. Press [ ] to move to Fine...

  • Page 48: Response Time

    Screen Setup Response Time Accelerate the panel response rate to make video appear more vivid and natural. It is best to set Response Time Normal Faster when you are not viewing a movie.  The functions available on the monitor may vary depending on the model. Refer to the actual ...

  • Page 49: Configuring Tint

    Configuring Tint Adjust the tint of the screen. This menu is not available when Bright is set to Cinema Dynamic Contrast mode. Adjust the value of the color red in the picture. (Range: 0~100) A higher value will increase the intensity of the color. This menu is not available when Color is in...

  • Page 50: Green

    Configuring Tint Green Adjust the value of the color green in the picture. (Range: 0~100) A higher value will increase the intensity of the color. This menu is not available when Color is in Full Intelligent mode. 4.2.1 Configuring Green Press [ ] on the product.

  • Page 51: Blue

    Configuring Tint Blue Adjust the value of the color blue in the picture. (Range: 0~100) A higher value will increase the intensity of the color. This menu is not available when Color is in Full Intelligent mode. 4.3.1 Configuring Blue Press [ ] on the product.

  • Page 52: Color Tone

    Configuring Tint Color Tone Adjust the general color tone of the picture. This menu is not available when Color is in Full Intelligent mode. 4.4.1 Configuring the Color Tone Settings Press [ ] on the product. MENU Press [ ] to move to COLOR and press [ ] on the product.

  • Page 53: Gamma

    Configuring Tint Gamma Adjust the mid-range brightness (Gamma) of the picture. 4.5.1 Configuring Gamma Press [ ] on the product. MENU Press [ ] to move to COLOR and press [ ] on the product. Press [ ] to move to Gamma and press [ ] on the product.

  • Page 54: Resizing Or Relocating The Screen

    Resizing or Relocating the Screen Image Size Change the picture size. 5.1.1 Changing the Picture Size Press [ ] on the product. MENU Press [ ] to move to SIZE&POSITION and press [ ] on the product. Press [ ] to move to Image Size and press [ ] on the product.

  • Page 55: H-Position & V-Position

    Resizing or Relocating the Screen Press [ ] to move to the option you want and press the [ The selected option will be applied. H-Position & V-Position H-Position: Move the screen to the left or right. V-Position: Move the screen up or down. This menu is only available when Image Size is set to...

  • Page 56: Menu H-Position & Menu V-Position

    Resizing or Relocating the Screen Menu H-Position & Menu V-Position Menu H-Position: Move the menu position to the left or right. Menu V-Position: Move the menu position up or down. 5.3.1 Configuring Menu H-Position or Menu V-Position Press [ ] on the product. MENU Press [ ] to move to...

  • Page 57: Setup And Reset

    Setup and Reset Eco Motion Sensor, Eco Light Sensor, and Eco Saving options are displayed on the same menu page so that you can conveniently configure the power saving settings. 6.1.1 Eco Motion Sensor Eco Motion Sensor activates to save power when it does not detect any movement within a specified area for a specified period of time.
  • Page 58 Setup and Reset Configuring Backlight Press [ ] on the product. MENU Press [ ] to move to SETUP&RESET and press [ ] on the product. Press [ ] to move to and press [ ] on the product. Press [ ] to move to Backlight and press [...

  • Page 59: Eco Light Sensor

    Setup and Reset 6.1.2 Eco Light Sensor Eco Saving feature optimizes the view condition and contributes to power saving by adjusting the screen brightness depending on the ambient light intensity. This menu is not available when Eco Saving is set . ...
  • Page 60 Setup and Reset Configuring Sensitivity Press [ ] on the product. MENU Press [ ] to move to SETUP&RESET and press [ ] on the product. Press [ ] to move to and press [ ] on the product. Press [ ] to move to Sensitivity and press [...
  • Page 61 Setup and Reset Configuring Brightness Level Press [ ] on the product. MENU Press [ ] to move to SETUP&RESET and press [ ] on the product. Press [ ] to move to and press [ ] on the product. Press [ ] to move to Brightness Level...

  • Page 62: Eco Saving

    Setup and Reset 6.1.3 Eco Saving Eco Saving function reduces power consumption by controlling the electric current used by the monitor panel. This menu is not available when Eco Light Sensor is set.  This menu is not available when Bright is in Dynamic Contrast...

  • Page 63: Eco Icon Display

    Setup and Reset 6.1.4 Eco Icon Display Configuring Eco Icon Display Press [ ] on the product. MENU Press [ ] to move to SETUP&RESET and press [ ] on the product. Press [ ] to move to and press [ ] on the product.
  • Page 64 Setup and Reset will decrease with a moon image displayed. The brightness slide bar will be displayed for 3 seconds after the sensor activates. You've saved * tree(s). A pop-up as shown above will appear when an energy tree completes while Eco Icon Display ...

  • Page 65: Menu Transparency

    Setup and Reset Menu Transparency Set the transparency for the menu windows: 6.2.1 Changing Menu Transparency Press [ ] on the product. MENU Press [ ] to move to SETUP&RESET and press [ ] on the product. Press [ ] to move to Menu Transparency and press [ ] on the product.

  • Page 66: Language

    Setup and Reset Language Set the menu language. A change to the language setting will only be applied to the onscreen menu display.  It will not be applied to other functions on your PC.  6.3.1 Changing the Language Press [ MENU ] on the product.

  • Page 67: Pc/Av Mode

    Setup and Reset PC/AV Mode PC/AV Mode to AV. The picture size will be enlarged. This option is useful when you view a movie. PC/AV Mode is only available in Digital mode. 6.4.1 Configuring PC/AV Mode Press [ ] on the product. MENU Press [ ] to move to...

  • Page 68: Auto Source

    Setup and Reset Auto Source Activate Auto Source. 6.5.1 Configuring Auto Source Press [ ] on the product. MENU Press [ ] to move to SETUP&RESET and press [ ] on the product. Press [ ] to move to Auto Source and press [ ] on the product.

  • Page 69: Display Time

    Setup and Reset Display Time Set the on-screen display (OSD) menu to automatically disappear if the menu is not used for a specified period of time. Display Time can be used to specify the time after which you want the OSD menu to disappear. 6.6.1 Configuring Display Time Press [ ] on the product.

  • Page 70: Key Repeat Time

    Setup and Reset Key Repeat Time Control the response rate of a button when the button is pressed. 6.7.1 Configuring Key Repeat Time Press [ ] on the product. MENU Press [ ] to move to SETUP&RESET and press [ ] on the product.

  • Page 71: Customized Key

    Setup and Reset Customized Key You can customize Customized Key as follows. 6.8.1 Configuring Customized Key Press [ ] on the product. MENU Press [ ] to move to SETUP&RESET and press [ ] on the product. Press [ ] to move to Customized Key and press [ ] on the product.

  • Page 72: Off Timer On/Off

    Setup and Reset Off Timer On/Off Enable or disable the off timer that automatically powers off the product. 6.9.1 Configuring Off Timer On/Off Press [ ] on the product. MENU Press [ ] to move to SETUP&RESET and press [ ] on the product.

  • Page 73: Off Timer Setting

    Setup and Reset 6.10 Off Timer Setting The off timer can be set within a range of 1 to 23 hours. The product will automatically power off after the specified number of hours. This menu is only available when Off Timer On/Off is set to On.

  • Page 74: Reset

    Setup and Reset 6.11 Reset Return all the settings for the product to the default factory settings. 6.11.1 Initializing Settings (Reset) Press [ ] on the product. MENU Press [ ] to move to SETUP&RESET and press [ ] on the product. Press [ ] to move to Reset...

  • Page 75: Information Menu And

    INFORMATION Menu and Others INFORMATION View the current input source, frequency and resolution. 7.1.1 Displaying INFORMATION Press [ ] on the product. MENU Press [ ] to move to INFORMATION. The current input source, frequency and resolution will appear. PICTURE COLOR Analog SIZE&POSITION...

  • Page 76: Troubleshooting Guide

    Requirements Before Contacting Samsung Customer Service Center 8.1.1 Testing the Product Before calling Samsung Customer Service Center, test your product as follows. If the problem persists, contact Samsung Customer Service Center. Check if your product is operating normally by using the product test function.
  • Page 77 Troubleshooting Guide Screen issue "Not Optimum Mode" is displayed. This message appears if the signal from the graphics card exceeds the maximum resolution or frequency for the product. Change the maximum resolution and frequency to suit the product performance, referring to Standard Signal Mode Table (page 84).
  • Page 78 Troubleshooting Guide Sound issue The volume is too low. Adjust the volume. If the volume is still low after turning it up to the maximum level, adjust the volume on your PC sound card or software program. Source device issue A beeping sound is heard when my PC is booting.
  • Page 79 Troubleshooting Guide Q & A Question Answer How can I change the Set the frequency on your graphics card. frequency? Windows XP: Select Control Panel Appearance and  Themes Display Settings Advanced Monitor, and adjust Refresh rate under Monitor settings. Windows ME/2000: Select Control Panel Display ...
  • Page 80 Troubleshooting Guide Question Answer How can I change the Windows XP: Go to Control Panel Appearance and  resolution? Themes Display Settings and adjust the resolution. Windows ME/2000: Go to Control Panel Display  Settings and adjust the resolution. Windows Vista: Go to Control Panel Appearance and ...

  • Page 81: Specifications

    Specifications General Model Name S22A650D S24A650D S27A650D S24A850DW Panel Size 21.5 inches (54 24 inches (61 27 inches (68 24 inches (61 Display area 476.64 mm (H) 531.36 mm (H) 597.6 mm (H) x 518.4 mm (H) x x 268.11 mm x 298.89 mm 336.15 mm (V) 324.0 mm (V)
  • Page 82 This Class B device designed for home use is registered for EMC requirements and can be used in all regions. (USA Only) Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website, www.samsung.com/recyclingdirect, or call (877) 278 - 0799 9 Specifications...

  • Page 83: Powersaver

    Specifications PowerSaver The power-saving function of this product reduces power consumption by switching off the screen and changing the color of the power LED if the product is not used for a specified period of time. The power is not turned off in power-saving mode. To switch the screen back on, press any key on the keyboard or move the mouse.

  • Page 84: Standard Signal Mode Table

    Specifications Standard Signal Mode Table This product can be set to only one resolution for each screen size to obtain the optimum picture  quality due to the nature of the panel. Therefore, a resolution other than the specified resolution may degrade the picture quality.
  • Page 85 Specifications Horizontal Vertical Pixel Clock Sync Polarity Resolution Frequency Frequency (MHz) (H/V) (kHz) (Hz) VESA, 1280 x 1024 63.981 60.020 108.000 VESA, 1280 x 1024 79.976 75.025 135.000 VESA, 1440 x 900 55.935 59.887 106.500 VESA, 1440 x 900 70.635 74.984 136.750 VESA, 1600 x 1200...

  • Page 86: Appendix

    Appendix Contact SAMSUNG WORLD WIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. NORTH AMERICA U.S.A 1-800-SAMSUNG (726-7864) http://www.samsung.com CANADA 1-800-SAMSUNG (726-7864) http://www.samsung.com/ca (English) http://www.samsung.com/ca_fr (French) MEXICO 01-800-SAMSUNG (726-7864) http://www.samsung.com...
  • Page 87 (Dutch) http://www.samsung.com/be_fr (French) BOSNIA 05 133 1999 http://www.samsung.com BULGARIA 07001 33 11 , normal tariff http://www.samsung.com CROATIA 062 SAMSUNG (062 726 7864) http://www.samsung.com CYPRUS 8009 4000 only from landline http://www.samsung.com (+30) 210 6897691 from mobile and land line Appendix...
  • Page 88 808 20 - SAMSUNG (808 20 7267) http://www.samsung.com RUMANIA 08008 SAMSUNG (08008 726 http://www.samsung.com 7864) TOLL FREE No. SERBIA 0700 SAMSUNG (0700 726 7864) http://www.samsung.com SLOVAKIA 0800 - SAMSUNG (0800-726 786) http://www.samsung.com SPAIN 902 - 1 - SAMSUNG (902 172 678) http://www.samsung.com Appendix...
  • Page 89 Appendix EUROPE SWEDEN 0771 726 7864 (SAMSUNG) http://www.samsung.com SWITZERLAND 0848-SAMSUNG http://www.samsung.com/ch (7267864, CHF 0.08/min) (German) http://www.samsung.com/ch_fr (French) 0330 SAMSUNG (7267864) http://www.samsung.com ARMENIA 0-800-05-555 http://www.samsung.com AZERBAIJAN 088-55-55-555 http://www.samsung.com BELARUS 810-800-500-55-500 http://www.samsung.com GEORGIA 0-800-555-555 http://www.samsung.com KAZAKHSTAN 8-10-800-500-55-500 http://www.samsung.com (GSM: 7799) KYRGYZSTAN 00-800-500-55-500 http://www.samsung.com...
  • Page 90 1800 3000 8282 1800 266 8282 INDONESIA 0800-112-8888 http://www.samsung.com 021-5699-7777 JAPAN 0120-327-527 http://www.samsung.com MALAYSIA 1800-88-9999 http://www.samsung.com NEW ZEALAND 0800 SAMSUNG (0800 726 786) http://www.samsung.com PHILIPPINES 1-800-10-SAMSUNG (726-7864) http://www.samsung.com for PLDT 1-800-3-SAMSUNG (726-7864) for Digitel 1-800-8-SAMSUNG (726-7864) for Globe 02-5805777 SINGAPORE 1800-SAMSUNG (726-7864) http://www.samsung.com...
  • Page 91 Appendix MIDDlE EAST MOROCCO 080 100 2255 http://www.samsung.com OMAN 800-SAMSUNG (726-7864) http://www.samsung.com/ae (English) http://www.samsung.com/ae_ar (Arabic) SAUDI ARABIA 9200-21230 http://www.samsung.com/ae (English) http://www.samsung.com/ae_ar (Arabic) TURKEY 444 77 11 http://www.samsung.com U.A.E 800-SAMSUNG (726-7864) http://www.samsung.com AFRICA ANGOLA 91-726-7864 http://www.samsung.com BOTSWANA 0800-726-000 http://www.samsung.com CAMEROON 7095- 0077 http://www.samsung.com...
  • Page 92 Appendix Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should not be disposed of with other household waste at the end of their working life.
  • Page 93 Appendix Terminology OSD(On Screen Display) On screen display (OSD) allows you to configure on-screen settings to optimize the picture quality as required. It allows you to change the screen brightness, tint, size and many other settings using menus displayed on the screen. HUB refers to a device that is a common connection point for multiple devices connected over a network.
  • Page 94 Appendix Horizontal Frequency Characters or images displayed on the monitor screen consist of numerous dots (pixels). Pixels are transmitted in horizontal lines, which are then arranged vertically to create an image. The horizontal frequency is measured in kHz and represents how many times horizontal lines per second are transmitted and displayed on the monitor screen.
  • Page 95 Model Only) MAGIC Connecting the Product to a PC as a USB MagicRotation Auto HUB (for the SA850 Model Only) Menu Transparency Contact SAMSUNG WORLDWIDE Contrast Copyright Correct Disposal of This Product (Waste Off Timer On/Off Electrical & Electronic Equipment)
  • Page 96 Index Requirements Before Contacting Samsung Customer Service Center Reset Response Time Safety Precautions Sharpness Size Standard Signal Mode Table Terminology Index...

This manual is also suitable for:

Syncmaster s24a850dwSyncmaster s27a650dSyncmaster s22a650d

Table of Contents