Enabling/Disabling Traffic Data On The Map Page; Changing The Altitude Range; Viewing The Traffic Page - Garmin Pilot User Manual

Enabling/disabling traffic data on the Map Page:

1) From any page touch
2) Touch
3) Select 'Show Traffic'.

Viewing the Traffic Page:

1) From any page touch
2) Touch

Changing the altitude range:

1) On the Traffic Page, Touch Altitude Filter.
2) Touch one of the following options:
• Unrestricted: All available traffic is displayed.
• Above: Displays non-threat and proximity traffic from 9000 feet
above the aircraft to 2700 feet below the aircraft. Typically used during
climb phase of flight.
• Normal: Displays non-threat and proximity traffic from 2700 feet
above the aircraft to 2700 feet below the aircraft. Typically used during
enroute phase of flight.
• Below: Displays non-threat and proximity traffic from 2700 feet
above the aircraft to 9000 feet below the aircraft. Typically used during
descent phase of flight.
190-01501-00 Rev. C
>
.
>
to change the range for the traffic rings.
Garmin Pilot for iOS User's Guide
.
.
Fly
115