Protrudent/Bumpy Paper; Other Problems - Epson AcuLaser M1400 Series User Manual

Note:
If the problem continues even though you have taken suggested actions described above, contact the
Epson local representative office or an authorised dealer.

Protrudent/Bumpy Paper

Problem
Printed surface got protrudent/bumpy.
Note:
If the problem continues even though you have taken suggested actions described above, contact the
Epson local representative office or an authorised dealer.

Other Problems

Problem
Condensation has occurred inside the
printer.
Action
Clean up the fusing unit.
1. Load one sheet of paper on the multipurpose feeder (MPF), and then print a solid
image all over paper.
2. Load the printed sheet with the side to be printed on facing down, and then print
a blank sheet of paper.
Action
This usually occurs within several hours after you heat the room in winter. This also
occurs when the printer is operating in a location where relative humidity reaches
85% or more. Adjust the humidity or relocate the printer to an appropriate
environment.
Epson AcuLaser M1400 Series
Troubleshooting
User's Guide
79