Toner Smears Or Print Comes Off/Stain On Back Side - Epson AcuLaser M1400 Series User Manual

Problem
The output is too light.
Note:
If the problem continues even though you have taken suggested actions described above, contact the
Epson local representative office or an authorised dealer.

Toner Smears or Print Comes Off/Stain on Back Side

Action
The toner cartridge may be low or need to be replaced. Confirm the amount of
toner in the toner cartridge.
1. Check the Estimated Toner Level on the Consumables tab in the Printer
Status window.
2. Replace the toner cartridge as necessary.
Verify that the print media is dry and the correct print media is used.
If not, use the print media recommended for the printer.
1. Launch the Printer Setting Utility, click Adjust BTR on the Printer Maintenance
tab.
2. Adjust the setting for the type of print media being used.
3. Click Apply New Settings button.
See Also:
"Usable Print Media" on page 27
Try changing the Paper Type setting in the print driver.
On the Paper/Output tab in Printing Preferences of the print driver, change the
Paper Type setting.
Disable Toner Saving Mode in the print driver.
1. On the Graphics tab in Printing Preferences of the print driver, ensure that the
Toner Saving Mode check box is not selected.
Epson AcuLaser M1400 Series
Troubleshooting
User's Guide
71