Printing For Second Time - Canon SELPHY CP900 User Manual

5
6
7
On the screen, wireless signal strength is indicated by the following icons.
O
[ ] high, [
Printing for the Second Time
Once you have configured settings, the second screen in Step 7 (Ready screen) is displayed when you
O
turn the power on. All you have to do is to connect the smartphone to the printer whenever you want to
print.
You can display the screen in Step 6 to see the SSID and WEP key by pressing the o button while the
O
Ready screen is displayed.
30
] medium, [ ] low, [ ] weak or no service
Select the wireless LAN mode.
Press the ud buttons to select [Ad Hoc], and then
O
press the o button.
Connect the smartphone to the network
displayed on the printer screen.
Check that the screen on the left is displayed on the
O
printer.
Select the SSID (network name) displayed on the printer
O
from the Wi-Fi setting menu on the smartphone.
Enter the WEP key (password) displayed on the printer
O
into the password field.
Press the EDIT button to display the [Encryption Key
O
Entry] screen and press the EDIT button again to change
the WEP key (p. 42).
Print from the smartphone.
Print the image from the smartphone.
O
The screen on the left is displayed when printing starts.
X
Do not shut down the communication and do not quit the
printing application while this screen is displayed. The
printing result may be incomplete or incorrect.
The screen on the left is displayed when printing is
X
complete.
Repeat Step 7 if you want to print another image.
O