Selecting And Printing Images - Canon SELPHY CP900 User Manual

Selecting and Printing Images

You can select an image and specify the number of copies for printing. In this section, an SD memory card
will be used as an example, but you can print from other memory cards using the same steps.
1
2
3
Label side
4
5
Number of copies for the
displayed image
Turn on SELPHY.
O
O
Raise the screen (LCD monitor).
O
Approx. 45°
Insert the memory card into the slot.
O
O
X
Select an image.
O
O
Select the number of copies.
O
O
O
Number of copies
Press and hold the q button until the screen shown on
the left is displayed.
To turn the power off, press and hold the q button and
release when the screen display changes.
Do not raise the LCD monitor more than 45° as this may
result in damage or malfunction.
Insert the card faced as shown in the illustration until it
clicks.
To remove the card, push it in until it clicks and release
your finger slowly.
The screen in Step 4 below (image display screen)
(p. 7) will be displayed.
Press the lr buttons to select an image to print.
Every 5th image will be displayed if you press and hold
the lr buttons.
Press the ud buttons to select the number of copies.
If you press and hold the ud buttons, the number
increases or decreases by 5 copies.
To print another image at the same time, repeat Steps 4
and 5.
13