Connection Using Wps - Canon PIXMA MG3220 Series Setup Manual

c Connection Using WPS
1. Press the Fit to Page button (A).
2. Make sure that the LED fl ashes as shown in the illustration above, then press and hold the WPS
button on the access point within 2 minutes.
For details on pressing the WPS button, refer to the access point manual.
The (blue) Wi-Fi lamp on the printer fl ashes while searching for or connecting to the access point.
3. When wireless connection is complete, the LED lights up for about 3 seconds, then changes to "1" as
shown in the left illustration below. Make sure that the (blue) Wi-Fi lamp on the printer is lit.
The network connection setup is now complete.