Power Button; Reset Button - Asus RT-N66U Dark Knight User Manual

Power LED
1
Off: No power.
On: Device is ready.
Flashing slow: Rescue mode
Flashing quick: WPS is processing.
LAN LED
2
Off: No power or no physical connection.
On: Has physical connection to a local area network (LAN).
WAN LED
3
Off: No power or no physical connection.
On: Has physical connection to a wide area network (WAN).
2.4GHz LED / 5GHz LED
4
Off: No 2.4GHz or 5GHz signal.
On: Wireless system is ready.
Flashing: Transmitting or receiving data via wireless connection.
USB LED
5
Off: No power or no physical connection.
On: Has physical connection to USB devices.
Power (DC-In) port
6
Insert the bundled AC adapter into this port and connect your router to a power source.

Power button

7
Press this button to power on or off the stystem.
USB 2.0 ports
8
Insert USB 2.0 devices such as USB hard disks or USB flash drives into these ports.
Insert your iPad's USB cable into one of these ports to charge your iPad.

Reset button

9
This button resets or restores the system to its factory default settings.
WAN (Internet) port
10
Connect a network cable into this port to establish WAN connection.
LAN 1 ~ 4 ports
11
Connect network cables into these ports to establish LAN connection.
WPS button
12
This button launches the WPS Wizard.
6
On Off