Adjusting the Screen Image ..........7 Main Menu Controls ..............9 Other Information Specifications ..............13 Troubleshooting..............14 Customer Support ...............15 Cleaning the ViewPanel ............16 Limited Warranty ..............17 Appendix Safety Guidelines ..............18 Compliance Information for U.S.A........19 CE Conformity for Europe ...........19 06/14/02 B ViewSonic VE155...
NERGY Disclaimer: ViewSonic Corporation shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from furnishing this material, or the performance or use of this product.
NOTE: Guide PDF files and INF/ICM display optimization files. The INF files ensures compatibility with Windows operating systems, and the ICM file (Image Color Matching) ensures accurate on-screen colors. ViewSonic recommends that you install both files. Precautions • Sit at least 18" from your ViewPanel.
See the Customer INF file. This is on the CD. Support table in this guide. 4 Insert the ViewSonic Wizard CD The ViewSonic Wizard CD-ROM also into the computer’s CD drive • Follow the on-screen instructions.
Installation of Wall Mount (Optional) To obtain a wall-mounting kit, contact ViewSonic or your local dealer. Refer to the instructions that come with the base mounting kit. To convert your ViewPanel from a desk-mounted to a wall-mounted display, do the following: Disconnect Power.
5 seconds. With or without this setting, after a power failure, your ViewPanel’s power will automatically turn ON when power is restored. • Power Button Unlock: Press and hold [1] and the down arrow again for 10 seconds. ViewSonic VE155...
Power light changes to, and exits the Main Menu. Power On/Off Selects a highlighted control. Also, Scroll through menu displays the control screen for the options and adjust the selected control and toggles displayed control. between control pairs. ViewSonic VE155...
Page 9
• If necessary, make small adjustments using H. POSITION and V. POSITION until the screen image is completely visible . (The black border around the edge of the screen should barely touch the illuminated “active area” of the ViewPanel ® ViewSonic VE155...
Default setting. — Individual adjustments for red, green, and blue. User To select color (R, G or B) press button [2]. To adjust selected color, press When you are finished making all color adjustments, press button [1] twice. ViewSonic VE155...
Page 11
H. Frequency: 48.60 KHz V. Frequency: 60.00 Hz Pixel Clock: 65.00 MHz Resolution: 1024 x 768 Model Number: VLCDS23585-1W Serial No: www.viewsonic.com 1:EXIT Image Adjust Image Adjust H./V. Position H. Size Fine Tune Sharpness 1:EXIT 2:SELECT The Image Adjust controls are explained below: adjusts horizontal and vertical position of the H./V.
Page 12
Contr ol Explanation sharpens focus by aligning the illuminated text and/ Fine Tune or graphic characters. Try the Auto Adjust (see page 9) before using the Fine NOTE: Tune control. adjusts the clarity and focus of the screen image. Sharpness displays the menu shown below.
Page 13
Control Explanation returns adjustments to the original factory Memory Recall settings if the display is operating in a factory Preset Timing Mode listed in this user guide. ViewSonic VE155...
Warning: Do not set the graphics card in your computer to exceed these refresh rates; doing so may result in permanent damage to the ViewPanel. ® Macintosh computers older than G3 require a ViewSonic , Macintosh adapter. To order an adapter, contact ViewSonic.
Loose or broken pins in the cable connector could cause an improper connection. • Connect the ViewPanel to another computer. • If you have an older graphics card, contact ViewSonic ® for a non-DDC adapter.
You will need the product serial number. NOTE: Country/ Web site T = Telephone Email Region F = FAX United States viewsonic.com/ T: (800) 688-6688 service.us@ support F: (909) 468-1202 viewsonic.com Canada viewsonic.com/ T: (800) 688-6688 support F: (909) 468-1202 service.ca@...
ViewPanel screen or case. Some chemical cleaners have been reported to damage the screen and/or case of the ViewPanel. ViewSonic will not be liable for damage resulting from use of any ammonia or alcohol-based cleaners.
If a product proves to be defective in material or workmanship during the warranty period, ViewSonic will, at its sole option, repair or replace the product with a like product. Replacement product or parts may include remanufactured or refurbished parts or components.
Appendix Safety Guidelines Warning: This device must be operated with the original power supply, part number: 12VDC LSE9901B1250, 12VDC UP06031120. CAUTION: The socket-outlet should be installed near the equipment and should be easily accessible. CAUTION: Use a power cable that is properly grounded. Always use the appropriate AC cord that is certi- fied for the individual country.
CE Conformity for Europe The device complies with the requirements of the EEC directive 89/336/EEC as amended by 92/31/EEC and 93/68/EEC Art.5 with regard to “Electromagnetic compatibility”, and 73/ 23/EEC as amended by 93/68/EEC Art.13 with regard to “Safety.” ViewSonic VE155...