Fax; Using The Ews - Lexmark Color Laser Installation And Administration Manual

10
For User-Initiated E-mail, select the option most appropriate for your network/server environment.
11
If the MFP must provide credentials in order to send E-mail, enter the information appropriate for your network
in the Device Userid, Device password, and Kerberos 5 Realm or NTLM Domain fields.
12
Touch Submit.

Fax

If your MFP includes fax capabilities and is attached to a phone line, you must disable fax forwarding, enable held
faxes, and disable driver to fax.

Using the EWS

1
From the EWS, click Settings > Fax Settings > Analog Fax Setup.
Note: For information about accessing the EWS, see "Using the Embedded Web Server" on page 15. Be sure to
disable HTTP and HTTPS access after you have finished using the EWS.
2
Under Fax Receive Settings, click Holding Faxes.
3
Set Held Fax Mode to Always On.
4
Click Submit, to save changes and return to Settings.
5
Under Fax Send Settings, clear the Driver to fax check box.
6
Under Fax Receive Settings, select Print, from the Fax Forwarding list.
7
Click Submit.
Using the touch screen
1
From the home screen, touch Menus > Settings > Fax Settings > Analog Fax Setup > Fax Receive Settings.
2
Scroll to locate Holding Faxes. Select Holding Faxes.
3
Set Held Fax Mode to Always On.
4
Touch Submit, to save changes and return to Fax Receive Settings.
5
From the Fax Receive Settings screen, scroll to locate Fax Forwarding. Set Fax Forwarding to Print.
6
Touch Submit, to save changes and return to Analog Fax Setup.
7
From the Analog Fax Setup screen, select Fax Send Settings.
8
Scroll to locate "Driver to fax". Set "Driver to fax" to No.
9
Touch Submit.
26