Configuring Printer Settings For Use With Pki Applications; Tcp/Ip Settings - Lexmark 6500e Installation And Configuration Manual

The installation files include:
Application
PKI Authentication
PKI S/MIME Email
PKI Scan to Network
PKI Held Jobs (Print Release Lite)
The file names shown are not version-specific. Use the latest version available for each
file. For information about available versions, contact the Lexmark Solutions Help Desk.
PKI Authentication must be installed first. For each application you want to install:
1
From the Embedded Web Server, click Settings > Embedded Solutions.
2
On the Solutions tab, click Install.
3
Browse to locate the correct application file, and then click Start Install.
4
After the installation has finished, click Return. The application should now be listed under Installed Solutions.
Configuring printer settings for use with PKI
applications
Even if the printer has been set up previously, make sure all settings necessary for the PKI capability to function
correctly have been configured.

TCP/IP settings

1
From the Embedded Web Server, click Settings > Network/Ports > TCP/IP.
2
Under TCP/IP:
•
Verify the Domain Name. Normally, the domain will be the same one assigned to user workstations.
•
If using a static IP address, verify the WINS Server Address, and the DNS Server Address.
•
If the printer is located in a different domain than the domain controller, the E-mail server, or any file share
users may need to scan to from the device, list the additional domains in the Domain Search Order field,
separated by commas.
3
Click Submit.
Installation file
pkiadauth-x.x.x.fls
pkiademail-x.x.x.fls
pkiadnetworkscan.x.x.x-fls
pkiadheldjobs.x.x.x.fls
Configuring PKI-enabled devices
8