Bios Menu Screen - Asus F1A75-M LE User Manual

BIOS menu screen

The BIOS setup program can be used under two modes: EZ Mode and Advanced Mode.
You can change modes from the Exit menu or from the Exit/Advanced Mode button in the EZ
Mode/Advanced Mode screen.
EZ Mode
By default, the EZ Mode screen appears when you enter the BIOS setup program. The EZ
Mode provides you an overview of the basic system information, and allows you to select
the display language, system performance mode and boot device priority. To access the
Advanced Mode, click Exit/Advanced Mode, then select Advanced Mode.
The default screen for entering the BIOS setup program can be changed. Refer to the
Setup Mode item in section 2.7 Boot menu for details.
Displays the CPU/motherboard temperature,
CPU/5V/3.3V/12V voltage output,
CPU/chassis fan speed
EFI BIOS Utility - EZ Mode
Tuesday [1/1/2008]
Temperature
CPU +113.0ºF/+45.0ºC
MB +75.2ºF/+40.0ºC
Q-Fan Control
Performance
Boot Priority
Use the mouse to drag or keyboard to navigate to decide the boot priority.
Selects the boot device priority
Displays the system properties of the
selected mode on the right hand side
The boot device options vary depending on the devices you installed to the system.
2-8
F1A75-M LE
BIOS Version : 0308
CPU Type : AMD Engineering Sample
Total Memory : 1024 MB (DDR3 1333MHz)
Voltage
CPU 1.248V
3.3V 3.344V
Quiet
Energy Saving
Normal
Power Saving mode
Selects the display language of
the BIOS setup program
Exits the BIOS setup program without saving
the changes, saves the changes and resets
the system, or enters the Advanced Mode
5V 5.160V
12V 12.248V
Normal mode
Clicks to display all fan
speeds if available
Exit/Advanced Mode
Build Date : 06/13/2011
Speed : 2400 MHz
Fan Speed
CPU_FAN 3325RPM CHA_FAN
Loads optimized default
ASUS Optimal mode
ASUS F1A75-M LE
English
N/A
Default(F5)