Cleaning The Debris Filter - Samsung WF361BVBEWR/A1 User Manual

User manual ver.1.0 (english, french, spanish)
Hide thumbs Also See for WF361BVBEWR/A1:
Table of Contents

Advertisement

Available languages

Available languages

CLEANING THE DEBRIS FILTER

We recommend cleaning the debris filter when water does not drain well or the "nd" error message is displayed.
1. Open the filter cover by pressing and then pulling the
handle of the filter cover with your finger.
2. Holding the drain cap, pull the drain tube that
is hooked on the guide hook to the front. Do
not pull the drain tube with excessive force.
3. Place a bowl under the washing machine to
catch any remaining water. Then, hold the
drain tube with one hand, and turn the drain
cap counter clockwise with the other hand to
separate it from the drain tube.
4. Drain the remaining water completely.
5. Turn the debris cap counterclockwise, and then pull
the debris cap and debris filter assembly out of the
washer.
6. Wash any dirt or other material from the
debris filter. Make sure the drain pump
propeller behind the debris filter is not
blocked.
7. When you have finished cleaning the filter, insert the debris
cap and filter assembly back into the washer. Turn the
debris filter cap clockwise until the indicator on the debris
filter cap is in the 12 o'clock position, pointing to the
indicator on the washer.
8. Re-attach the emergency drain cap to the drain tube, and
then hook the tube to the hook guide.
9. Re-install the filter cover.
WF361_363_365-02832J-03_EN_20120829.indd Sec7:27
WF361_363_365-02832J-03_EN_20120829.indd Sec7:27
Filter cover
Step 1
Drain cap
Debris filter cap
Debris filter
cap
cleaning and maintaining your washer _27
Step 2
Debris filter
2012-08-31
2012-08-31
12:38:20
12:38:20

Advertisement

Table of Contents
loading

Table of Contents