Installation; Rack Mounting; Connectors - BBE DS24 User And Reference Manual

®
PIN 1 = Ground
PIN 2 = HOT (+)
PIN 3 = COLD (-)
6
Your DS24/DS26 was carefully packed at the factory and the packaging
was designed to protect the unit from rough handling. Nevertheless, we
recommend that you carefully examine the packaging and its contents for
any signs of physical damage that may have occurred in transit. If the unit
is damaged please do not return it to us but notify your dealer and the
shipping company immediately, otherwise claims for damage or replace-
ment may not be granted. Shipping claims must be made by the con-
signee.

6.1 RACK MOUNTING

The DS24/DS26 fits into one standard 19" rack unit of space. Please allow at least an
additional 4" depth for the connectors on the back panel. Though this device does not
generate significant heat, be sure that there is enough air space around the unit for cool-
ing. To avoid overheating, do not place the DS24/DS26 in rack above devices that gener-
ate significant heat such as power amplifiers.

6.2 CONNECTORS

The DS24/DS26 must be installed using standard 3 –pin type XLR jacks. Although the
inputs are fully balanced, the automatic servo-functions allow them to operate with
unbalanced source/loads. Audio outputs also use XLR jacks.

INSTALLATION