1. Manuals
  2. Brands
  3. BBE Manuals
  4. Recording Equipment
  5. SONIC MAXIMIZER 482
  6. User and reference manual

BBE SONIC MAXIMIZER 482 User And Reference Manual

Hide thumbs Also See for SONIC MAXIMIZER 482:
Table of Contents

Advertisement

Quick Links

Download this manual
482
SONIC MAXIMIZER
User Guide
and
Reference
Manual

Advertisement

Table of Contents
loading

Related Manuals for BBE SONIC MAXIMIZER 482

Summary of Contents for BBE SONIC MAXIMIZER 482

  • Page 1 SONIC MAXIMIZER User Guide Reference Manual...

  • Page 3: Table Of Contents

    You now own a very unique signal processing device with no equal in the audio world. Whether you purchased the BBE 482 for your home studio, P.A., DJ system, or instrument rack, you will find the 482's rugged construction and careful electronic design a welcome addition to your sonic arsenal.

  • Page 4: Product Description

    The BBE 482 can be used as an effect on individual tracks or applied overall during mixdown. The BBE process works very well to liven up the final mix, which is why the BBE 482 and 882 models are popular for use in both recreational...

  • Page 5: Controls And Connections

    C H A N N E L B 1. LED DISPLAY: The LED display is used to indicate the output signal level of the BBE 482. Each number on the front panel corresponds to the output signal level, measured in decibels. Example: The “0” indicates a 0dBu signal level, “-6”...

  • Page 6: Specifications

    BBE processor is used. Additionally, the amount of equalization used will help determine the BBE 482’s proper location in the signal chain: If the EQ is being set to give the room a flat response as determined by a spectrum analyzer, the BBE 482 will work properly before or after the EQ.

  • Page 7: Application Diagrams

    AND OTHERS BBE 482 SONIC MAXIMIZER POWER CASSETTE DECK AMPLIFIER PA CABINET PA CABINET Connect the BBE 482 to the output of the mixing console. The output of the BBE will drive either a crossover or a power amplifier directly.
  • Page 8 AND OTHERS BBE 482 SONIC MAXIMIZER There are a couple of ways to configure the BBE 482 into a powered mixer. The ideal method would be into “Pre-Amp Out/Power Amp In” section of the console. If your console does not...
  • Page 9 US PATENT NO 4,482,866 AND OTHERS BBE 482 SONIC MAXIMIZER MASTERING DECK Use the BBE 482 for mastering the recording. Even if the BBE Process has been used on individual tracks, an improvement on the total mix will be noticed.
  • Page 10 BBE 482 SONIC MAXIMIZER POWER AMP 4 X 12” CAB 4 X 12” CAB Use the BBE 482 in the effects loop or the main output of a guitar preamp. For keyboards, the output of the sub-mixer will be the ideal location.
  • Page 11 PROCESSOR OUT MAIN PROCESSOR IN DJ MIXER CALIFORNIA USA MODEL 482 US PATENT NO 4,482,866 AND OTHERS BBE 482 SONIC MAXIMIZER POWER AMPLIFIER SPEAKERS Connect the BBE 482 into the processor loop of a pre-amplifier/mixer and hear the music come alive!

  • Page 12: Service /Warranty / Maintenance

    If this is not possible, call BBE Sound, Inc. directly at (714) 897-6766, extension 116 to obtain a “RETURN AUTHORIZATION”. Include a copy of the bill of sale with the unit when it is shipped to BBE Sound, Inc. so that the service can be expedited.

  • Page 13: Calibration Procedures

    Calibration Procedure for the BBE 482 (REV/S/ON 1.1) NOTE: THIS UNIT WAS TESTED AND CALIBRATED AT THE FACTORY. THIS PROCEDURE IS FOR QUALIFIED PERSONNEL ONLY. INITIAL SETTINGS: 1. BBE Process controls VR1 and VR3 to minimum.(C.C.W.) 2. Lo Contour controls VR2 and VR4 to minimum.(C.C.W.) 3.
  • Page 18 NOTES:...
  • Page 19 NOTES:...
  • Page 20 5381 Production Drive Huntington Beach, CA 92649 714-897-6766 • FAX 714-896-0736 www.bbesound.com covered by U.S. Patent 4,482,866 and other U.S. and foreign patents pending. BBE is the registered trademark of BBE Sound, Inc. rev. 1 5/99...

Table of Contents