Rs 232 Serial Interface; Getting Started; Ethernet; Disposal Notes - Dreambox DM 7000-S Instruction Manual

5. Getting started, 6. Disposal notes, 7. Important notes on operation

5.2 RS 232 serial interface

The RS 232 interface is used to update the operating software and for
pre-programming with a PC.

5.3 Ethernet

The Ethernet interface can be used to update the operating software and for
pre-programming with a PC.

6. Disposal notes

The packaging of the DM 7000 consists exclusively of recyclable materials.
Please dispose of these appropriately.
Take care that dead batteries from the remote control and electronic scrap
are not disposed of in ordinary rubbish, but are properly disposed of (return
to the specialist dealer, or special waste disposal).

7. Important notes on operation

The operation of the Dreambox is greatly simplified with an OSD (On Screen
Display). All available options are displayed with 4 coloured dots (red, green,
yellow, blue) and can be activated with the remote control.
The options change depending on the menu, and are labelled appropriately in
each menu.
You can leave all menus and channel lists with the LAME! key.
The menus are in general operated with the on your remote control.
To enter a sub-menu, confirm it with the OK key.
Direction keys
OK-key
5. Getting started, 6. Disposal notes, 7. Important notes on operation
11