4358-3340A Instrctions
11/15/04
Removal of Seat Base
Base must be removed for use as
Belt-Positioning Booster.
1
A
B
A
2
42
9:18 AM
Page 45
Move seat to fully
reclined position. Push
down on tab on right
side of base (A).
From the other side,
push on bar
(B)
and pull
the bar completely out.
Pull on recline lever and
lift shell off base. Store
bar in base for future use.
Removal of Harness
Harness must be removed for use as a
Belt-Positioning Booster.
From the back of the
1
seat, unfasten harness
from harness bracket.
Store the bracket by
2
inserting into hole in
back of shell.
Pull harness through the
3
slots from the front.
Unthread harness from
the harness retainer.
Unthread harness from
the buckle plates.
Pull harness out of shell.
43