Page 1
RS-1100 Bike Fellow 2 Repair Stand INSTRUCTION MANUAL Thank you for purchasing the Minoura RS-1100 repair stand. This foldable, light weight multi purpose stand allows you to use it as both a repair stand and a display stand. A convenient Carrying Bag with a tool pocket is available as an option.
HOW TO ASSEMBLE ¶ No tools are required to assemble your RS-1100. Loosen Knob Bolt-A on Lower Frame, slide up Upper Frame, and tighten again Knob Bolt-A slightly (see Fig. 1) . (Fig. 1) (Fig. 2) Open Leg-A fully until the leg locks (clicks) in place.
Page 3
Turn both Arm and Seat Tube Stay fully. Insert Seat Tube Support Bracket through and into the Seat Tube Stay, and insert the plastic cap. (see Fig. 5) (Fig. 5) The BB Support Bracket will help your bike stable during on this stand. The BB Support Bracket will open auto- matically when you open Arm.
Page 4
USE RS-1100 AS A REPAIR STAND Place RS-1100 on a flat stable surface. Pull up the Arm Stopper and insert it into the angled hollow firmly to lock it (see Fig. 9) . Arm Stopper (Fig. 9) To begin set the left side crank arm...
Page 5
(Fig. 14) (see Fig. 14) USE RS-1100 AS A DISPLAY STAND ¶ RS-1100 also can be used as a display stand or temporary bike stand. Place the RS-1100 on a flat and horizontal floor. Pull the Arm Stopper out fron the slot and lay it down.
Page 6
Place the top tube down softly on both Down Tube Supporter. (see Fig. (Fig. 17) FOR WARRANTY, MORE INFORMATION CONTACT : MINOURA WARRANTY CENTER 1415 San Mateo Avenue, South San Francisco, CA 94080 U.S.A. Toll Free: 800-601-9592 MINOURA NORTH AMERICA 37653 B Argyle Rd.