1. Manuals
  2. Brands
  3. MINOURA Manuals
  4. Fitness Equipment
  5. MAGTURBO ERGO
  6. Manual

MINOURA MAGTURBO ERGO Manual

Hide thumbs

Advertisement

Table of Contents

MAGTURBO ERGO INSTRUCTION MANUAL
Please read this instructions carefully before use.
Thank you for purchasing Minoura Magturbo Ergo trainer.
This is the best cost-performance stationary indoor bicycle trainer
with completely re-designed patented magnetic resistance device
that allows you to feel real road ride feel even in your house or
garage.
This trainer fits between 24" to 27" (700c) wheels with adjusting the
roller position.
If you want to ride MTB on this trainer, we strongly recommend to
replace the rear tire from knobby one to a slick one in order to avoid
vibration and noise problem caused by the tire pattern.
Enjoy your workout with Minoura Magturbo trainer.
- 1 -

Advertisement

Table of Contents
loading

Related Manuals for MINOURA MAGTURBO ERGO

Summary of Contents for MINOURA MAGTURBO ERGO

  • Page 1 MAGTURBO ERGO INSTRUCTION MANUAL Please read this instructions carefully before use. Thank you for purchasing Minoura Magturbo Ergo trainer. This is the best cost-performance stationary indoor bicycle trainer with completely re-designed patented magnetic resistance device that allows you to feel real road ride feel even in your house or garage.

  • Page 2: Important Notes

    • Do NOT use trainer for any other purpose than instructed. • The trainer is manufactured to precise standards. You may not disas- semble or rebuild it. • "Magturbo" is the trademarks of Minoura and may not be copied. WARNING Please obey warning signs.

  • Page 3: Assembling Your Trainer

    ASSEMBLING YOUR TRAINER Coupling Hub Handle Adjust Lever U-Leg Flywheel Housing Foot Cap Drive Roller Frame Micro Adjust Mag Resistance (Fig. A) Knob Unit Open the Frame and U-Leg and place on level floor. Tighten the Micro Adjust Knob Bolt with a spring and a flat washer.

  • Page 4: Installing Your Bicycle

    INSTALLING YOUR BICYCLE Before attaching your bicycle to this trainer, turn the Hub Handle in a counter- clockwise direction to open the trainer enough to easily line up your rear quick release (QR) with the Couplings. This will make it easier to attach the rear hub of your bicycle.
  • Page 5 Tighten the knob bolt until it starts to move the drive roller towards your tire. It is O.K. to use your hand to assist in this process. Once the drive roller comes in contact with your tire, tighten the knob bolt another half or one more turn.

  • Page 6: Using Unit

    USING THE MAGTURBO UNIT The Magturbo unit has seven different levels of load force, replicating actual riding resistance. The load settings range from high (H) to low (L) and can be adjusted via the white lever on the Magturbo unit or the lever on the thumb shifter device. The rider may also adjust the load force by shifting up or down among his gears, depending on the level desired.

  • Page 7: Troubleshooting Remote Shifter Unit

    <Trouble Shooting Your Remote Shifter Unit> Adjuster Nut If you experience your load level increasing automati- cally, the remote shifter lever may be loose. To solve this problem, adjust the small center knob nut on the remote shifter device. (see Fig. H) If you cannot shift to either the lowest (L) or the highest (Fig.

  • Page 8: Resolution Diagram

    Toll Free Fax 800-601-9592 or 650-871-8870 MINOURA JAPAN HEAD OFFICE 1197-1 Godo, Anpachi, Gifu 503-2305 JAPAN Phone +81- (0)584-27-3131 / Fax +81- (0)584-27-4258 E-mail: minoura@minoura.jp http:// www.minoura.jp MADE IN JAPAN Copyright 2001-2002 Minoura Japan All Rights Reserved. - 8 -...

Table of Contents