Download Print this page
AllerAir 600 D Hardware Installation Manual

AllerAir 600 D Hardware Installation Manual

Installing filter assembly

Advertisement

Quick Links

INSTALLING FILTER ASSEMBLY-
The AllerAir 600 models ship with their large carbon filters in a separate box.
This is done to safeguard your unit during shipping. To insert the filter, refer to the diagram below.
Step 1
Step 2
Turn Power Off and
With a #2 Philips screw driver,
unplug receptacle.
remove the four screws from the
Lay unit upside down.
bottom of the unit.
Step 4
Step 5
Remove only one of the white, felt,
Insert the carbon filter (either a
donut-shaped gaskets from the
Model 600 D Carbon or a Model 600
inside of the purifier body.
DX Carbon) into the unit.
Step 7
Place lid back to its proper position
Step 8
by aligning the arrow with the rear
seam.
Replace the four screws
AllerAir Industries Inc.
600 D, DX
Step 3
Gently grasp wheels.
Remove base by gently pulling on
the wheels.
Step 6
Replace the gasket that had been
removed in STEP 4.
Step 9
Turn the unit back onto its wheels.
It is now ready for immediate use.
Toll free: 1-888-852-8247 / Fax: 1-877-688-3939 www.allerair.com
INSTALLING FILTER ASSEMBLY- 600 Models
(except D and DX)
The AllerAir 600 models ship with their large carbon filters in a separate box.
This is done to safeguard your unit during shipping. To insert the filter, refer to the diagram below.
Step 1
Step 2
Turn Power Off and
With a #2 Philips screw driver,
unplug receptacle.
remove the four screws from the
Lay unit upside down.
bottom of the unit.
Step 5
First remove the HEPA filter by
Step 4
placing thumbs on the inner side of
the filter.
Remove base by gently pulling on
the wheels.
Then pull up gently until totally out.
Step 7
Step 8
Replace filters with new ones then
Place lid back to its proper position
reassemble by inserting the Carbon
by aligning the arrow with the rear
filter first then the HEPA filter.
seam.
AllerAir Industries Inc.
Step 3
Gently grasp wheels.
Step 6
Than remove the Carbon filter by
placing thumbs on the inner side of
the filter.
Then pull up gently until totally out.
Step 9
With a screw driver, place 4
screws back into their positions.
Gently return the unit into
upright position.
Toll free: 1-888-852-8247 / Fax: 1-877-688-3939 www.allerair.com

Advertisement

loading

Summary of Contents for AllerAir 600 D

  • Page 1 600 D, DX INSTALLING FILTER ASSEMBLY- The AllerAir 600 models ship with their large carbon filters in a separate box. This is done to safeguard your unit during shipping. To insert the filter, refer to the diagram below. Step 1...
  • Page 2 600 D, DX INSTALLING FILTER ASSEMBLY- The AllerAir 600 models ship with their large carbon filters in a separate box. This is done to safeguard your unit during shipping. To insert the filter, refer to the diagram below. Step 1...

This manual is also suitable for:

600 dx600 series