Calling; Calling Using Voice Commands; Transferring Sound; Using Another Device For Calling - Sony Ericsson MW600 Extended User Manual

Calling

To make a call
• Dial the number using the phone keys. The call is automatically activated in the
headset.
To end a call
• Press briefly.
To make a call using voice commands
Press briefly, wait for a beep and then say the command.
•
To answer a call
• A beep indicates an incoming call. Press
To reject a call
• Press and hold down
To re-dial a number
• Double-click .
To answer a second call
• Press . The ongoing call is put on hold.
To switch between two calls
• Press and hold down
To mute the microphone during a call
• Press and hold down

Calling using voice commands

Voice commands can be useful when you are using the headset. For more information on
voice commands, and if your phone supports calling using voice commands, see Voice
control in the phone User guide.

Transferring sound

To transfer the sound from the headset to the phone
• See Transferring sound to and from a Bluetooth handsfree in the phone User guide.
To transfer the sound from the phone to the headset
• During a call on the phone, press

Using another device for calling

Before you can use another device for calling, the headset has to be paired with the device.
The headset can be paired with up to three devices. Every time a phone is paired, this
device becomes the calling device automatically.
Only one of the paired devices can be selected as a calling device at the same time.
To select a calling device
1 Press and hold down
2 Use the touch volume control to select a calling device.
This is an Internet version of this publication. © Print only for private use.
briefly.
until you hear a beep.
until you hear a beep.
until you hear a beep.
.
until the calling device selection menu appears.
12